RCU404_US_IB_REVB
(BLINK)
ON•OFF
ENTER
7/16/03 15:34 Page 10
Note: For DVD or AUX, Press DVD•AUX, then the component key corresponding to the component to be stored under the AUX key. For DVD, press DVD•AUX, then the VCR key. For an auxiliary component, press DVD•AUX, then the corresponding component key (TV, VCR, DBS•CABLE).
4.Aim the remote at the component and press the ON•OFF key once.
The remote automatically sends every code for the specified component one at a time, with a 3 second delay between each code. Keep the remote aimed at the component throughout the process.
5.As soon as the component turns off, you must press the ENTER key immediately so the remote stores the correct code. If you don’t press ENTER within 3 seconds, the remote will send the next code in the list, and you will have to start over from step 2.
6.Use Code Retrieval to identify the code for your component for future reference.
Code Retrieval
If you used one of the Code Search methods to program your remote, follow the steps below to find out which code is compatible with your component. Finding the actual code and writing it down will save you time if you ever need to program the remote again (e.g., if programming is lost when you change the batteries).
CODE INDICATOR
SEARCH LIGHT
(BLINK)
CODE
SEARCH
(OFF)
1 2 3
4 5 6
7 8 9
1.Press and hold the CODE SEARCH key until the indicator light illuminates. Then release the CODE SEARCH key.
2.Press and release the component key that matches the component’s code you are retrieving (TV, VCR, or DBS•CABLE). The indicator light blinks once and then remains lit.
Note: For DVD or AUX, Press DVD•AUX, then the component key corresponding to the component stored under the AUX key. For DVD, press DVD•AUX, then the VCR key. For an auxiliary component, press DVD•AUX, then the corresponding component key (TV, VCR, DBS•CABLE).
3.Press and release the CODE SEARCH key. The indicator light turns off.
4.Starting with 0 on the keypad, press the number keys in order
0
10