Acoustic Research ARRX15G Test the Hello activity with your devices, Read about the test

Page 17

3 Test the “Hello” activity with your devices.

Once your remote is ready to test, the screen to the right appears.

Carefully disconnect the remote from your PC. The remote screens guide you through testing this activity.

12:35

Sony TV

Onkyo DVD

DirecTV Satellite Box

12:35

Press the power

button on the next page to turn off or on your devices in this activity.

12:35

Harmon/Kardon

Audio

OK

Read about the test

The first screen gives you some information about the test. Use the toggle bar to go to the next screen.

IMPORTANT: Make sure all your devices are off before you start.

Test individual power commands

The second screen lets you test the power command you set for each device. Select the on-screen remote button for each device to see if it turns that device on. (If it does, make sure you turn it back off!) Only the first three devices are shown on this page. Use the toggle bar to access the rest of your devices.

IMPORTANT: If you notice one of your devices does not respond to the power command, make a note—you will need to change the power command you give to that device.

Under your last device, there’s is an on-screen OK button. Select OK to continue with the test.

Act v t es

Activities

17

Image 17

Contents Setup Guide Unpack Out of the BoxNeed help setting up this remote? Install batteriesInteractive LCD screen Set Language Set Region Set Your Set Time Tutorial Remote SetupPreferred Clock Screens in the wrong language?Select Remote On-Remote Device SetupAfter the tutorial, select Let’s begin To go back a screen Don’t see your device?Don’t see your brand? More devices? Tips for setting up devicesSet master volume for devices with audio control How to see what you’ve set up so far Using the remoteMinimum software requirements Make sure your PC satisfies system requirementsMinimum hardware requirements Launch the EZ-RC Remote Control Setup Wizard Install the EZ-RC Remote Control Setup WizardSign into the EZ-RC Remote Control Setup Wizard What if my CD doesn’t start installation automatically?If you see this error message Connect your remote when promptedWhy ActiveX controls are necessary If you see a progress bar Corner of the screenNeed help setting up this remote? Setting up the Hello activity all on Set up your first activitiesChoose the activity you want to set up Hello Why Smart Wizard?Add a Hello activity Choose Smart WizardSet volume/channel/playback controls Configure the Hello activity for your devicesSet the power on commands Read about the test Test individual power commandsTest the Hello activity with your devices Did it work? Test the entire activityReconnect the remote to your PC How do I know the remote’s connected?If you add devices later Finish up the activityAdd a Good Night activity Setting up the Good Night activity all offChoose the activity you want to set up Good Night Set the power off commands Configure the Good Night activity for your devicesTest the Good Night activity with your devices How do I know the remote’s connected? Finish up the activity Write down which devices you use to Watch Movies Setting up a Watch Movie activityWhy Advanced Wizard? Add a new activity in the EZ-RC Remote Control Setup WizardChoose the activity you want to set up Watch Movie Choose Advanced WizardFor Watch Movie you don’t need to turn anything on To enter each command into the sequenceBuild the Watch Movie activity for your devices If you see this screen Don’t see the key command you want?Set the volume/channel/transport controls Write down which devices you use to Watch Satellite/Cable Setting up a Watch Satellite or Watch Cable activityAdd a new activity in the EZ-RC Remote Control Setup Wizard For this activity, you don’t need to turn anything on Don’t see the key command you want? Set the volume/channel/transport controls Need help after the Hello activity has finished? Using your activitiesHow do I know when an activity has finished? Is the wrong device changing inputs? What if Assist doesn’t work?If you’re not already signed How to make this remote all yoursCreating your family favorites Set the device you use to change channels Set up your favoritesSet how many digits your channels have Set how you finish entering a channel numberIf you don’t see your channel listed Choose your favorite channelsSelect a channel Type in the channel number When you fill up aAdd the next channel Check your channelsChoose the devices controlled by each section of the remote Add your Profile Creating Individual ProfilesIf you selected No Choose Profile typeChoose the channels for this profile Choose the devices controlled by each section of the remote Troubleshooting Setting Up Activities Using Favorites and Profiles Need help setting up this remote?