Acoustic Research ARRX15G setup guide How do I know the remote’s connected?

Page 23

12:35

Through out the

Activity test, point the remote toward your devices.

Begin Test

12:35

Reconnect USB to

verify Activity.

Test again

Test the entire activity

The next screen lets you test the “Good Night” activity with your entire system. IMPORTANT: Make sure all your devices are on before you start. Also make sure your remote is pointed directly at your home theater. Then select Begin Test. The screen says “Sending” while the remote is sending the power commands.

Did it work?

The next screen asks if the activity worked—if your devices turned off.

If it worked: Reconnect the remote to your PC (see the heading below).

If it didn’t work: Make sure your remote is pointed directly at your home entertainment devices and that there’s nothing obstructing the path, then select the Test again button. IMPORTANT: Make sure all your devices are on before you start. Test each device by selecting its on-screen soft key.

Then select OK to proceed and Begin test to test the entire activity again.

Try several times with the remote in different positions. If it still doesn’t work, go ahead and reconnect to PC to troubleshoot and correct the activity.

Reconnect the remote to your PC

Once you’ve reconnected the remote, press Continue on the EZ-RC™ Remote Control Setup Wizard screen.

How do I know the remote’s connected?

Look for the green arrow icon in your PC’s status bar.

Act v t es

Activities

23

Image 23

Contents Setup Guide Unpack Out of the BoxNeed help setting up this remote? Install batteriesInteractive LCD screen Screens in the wrong language? Remote SetupSet Language Set Region Set Your Set Time Tutorial Preferred ClockSelect Remote On-Remote Device SetupAfter the tutorial, select Let’s begin To go back a screen Don’t see your device?Don’t see your brand? More devices? Tips for setting up devicesSet master volume for devices with audio control How to see what you’ve set up so far Using the remoteMinimum software requirements Make sure your PC satisfies system requirementsMinimum hardware requirements What if my CD doesn’t start installation automatically? Install the EZ-RC Remote Control Setup WizardLaunch the EZ-RC Remote Control Setup Wizard Sign into the EZ-RC Remote Control Setup WizardIf you see a progress bar Corner of the screen Connect your remote when promptedIf you see this error message Why ActiveX controls are necessaryNeed help setting up this remote? Setting up the Hello activity all on Set up your first activitiesChoose Smart Wizard Why Smart Wizard?Choose the activity you want to set up Hello Add a Hello activitySet volume/channel/playback controls Configure the Hello activity for your devicesSet the power on commands Read about the test Test individual power commandsTest the Hello activity with your devices How do I know the remote’s connected? Test the entire activityDid it work? Reconnect the remote to your PCIf you add devices later Finish up the activityAdd a Good Night activity Setting up the Good Night activity all offChoose the activity you want to set up Good Night Set the power off commands Configure the Good Night activity for your devicesTest the Good Night activity with your devices How do I know the remote’s connected? Finish up the activity Write down which devices you use to Watch Movies Setting up a Watch Movie activityChoose Advanced Wizard Add a new activity in the EZ-RC Remote Control Setup WizardWhy Advanced Wizard? Choose the activity you want to set up Watch MovieFor Watch Movie you don’t need to turn anything on To enter each command into the sequenceBuild the Watch Movie activity for your devices If you see this screen Don’t see the key command you want?Set the volume/channel/transport controls Write down which devices you use to Watch Satellite/Cable Setting up a Watch Satellite or Watch Cable activityAdd a new activity in the EZ-RC Remote Control Setup Wizard For this activity, you don’t need to turn anything on Don’t see the key command you want? Set the volume/channel/transport controls Need help after the Hello activity has finished? Using your activitiesHow do I know when an activity has finished? Is the wrong device changing inputs? What if Assist doesn’t work?If you’re not already signed How to make this remote all yoursCreating your family favorites Set how you finish entering a channel number Set up your favoritesSet the device you use to change channels Set how many digits your channels haveIf you don’t see your channel listed Choose your favorite channelsSelect a channel Check your channels When you fill up aType in the channel number Add the next channelChoose the devices controlled by each section of the remote Choose Profile type Creating Individual ProfilesAdd your Profile If you selected NoChoose the channels for this profile Choose the devices controlled by each section of the remote Troubleshooting Setting Up Activities Using Favorites and Profiles Need help setting up this remote?