AMX R-3 manual Setup Mode, Transmit Mode, Timeout Adjustment

Page 11

Setup Mode

Setup Mode

The Setup mode allows you to set the following device features on the Mio R-3:

Transmit Mode

Timeout Adjustment

Download Mode

Debug Mode

Firmware Version

Device ID

LED Awake Brightness

LED Sleep Brightness

ZigBee ID PAN, Channel, and System Connection

Site Survey

To enter Setup mode:

1.Press and hold the STOP button and the INPUT button. The two buttons must be pressed within 0.1 seconds of each other and held down for 2 seconds. The device indicates you are now in Setup mode. The available modes are listed below.

2.Press the EXIT key when you are finished. The Mio R-3 will automatically exit Setup mode after 30 seconds unless the device is in Download mode.

Your settings will not be lost in the event of battery removal or failure.

Transmit Mode

Press button 1 to select from one of the different available transmission modes. The Transmit mode changes each time 1 is pressed. The predetermined modes are:

IR 38 Khz

IR 455 Khz

ZigBee Mode

IR 38 + ZigBee

IR 455 + ZigBee

The display indicates the selected mode. 30 seconds after selecting the mode, the menu returns to Setup mode.

Timeout Adjustment

Press button 2 on the remote to change the sleep timeout from the default. Each time 2 is pressed, the sleep timeout raises incrementally. The predetermined sleep timeouts are 3,6,9, and 12 seconds.

The display indicates the selected sleep timeout. 30 seconds after selecting the mode, the menu returns to Setup mode.

Mio Modero R-3 Remote

7

 

 

Image 11
Contents Mio Modero R-3 AMX Limited Warranty and Disclaimer Table of Contents Table of Contents Mio Modero R-3 Remote Mio Modero R-3 OverviewTouch And Tilt Sensor FCC Compliance Overview Mio Modero R-3 Remote Battery Low Indicator Mio Modero R-3 SetupInternal Mio R-3 Components Installing Custom ButtonsTimeout Adjustment Setup ModeTransmit Mode Device ID Download ModeDebug Mode Firmware VersionZigBee ID PAN, Channel, and System Connection Site Survey LED Sleep Mode BrightnessSetup Mode Mio Modero R-3 Remote Programming The Mio R-3 Using the Programming Jack on The Mio R-3Click Query for Devices Updating Mio R-3 FirmwareChannel Codes Channel CodesSelect @BRT Serial CommandsFML Numd RebootIrmode # JSTSLEEP-# Revd #Setd SHOUNI @SST@SWK TXTZigp ZAPZigc FML SendCommandsCFG Sendcommand Panel,FML-1,D Sendcommand Panel,REBOOT Sleep Sendcommand Panel,@SST-Panel StartWake Programming The Mio R-3 Mio Modero R-3 Remote Mio Remote Charging Base SpecificationsFG148-04 Charging The Mio Remote with Charging BaseMio Remote Charging Base Mio Modero R-3 Remote It’s Your World Take Control

R-3 specifications

The AMX R-3 is an advanced armored vehicle that represents a significant step forward in military technology and design, primarily aimed at enhancing battlefield capabilities for modern armed forces. This vehicle's features combine mobility, firepower, and protection, making it a versatile asset in various combat scenarios.

One of the standout characteristics of the AMX R-3 is its mobility. Built on a rugged chassis, it is equipped with a powerful engine that allows for rapid movement across diverse terrains, including urban environments and rough landscapes. This mobility is crucial in modern warfare where speed can often dictate the outcome of engagements. The vehicle's suspension system is designed to absorb shocks from uneven surfaces, providing a stable platform for its crew and equipment.

In terms of firepower, the AMX R-3 is armed with a sophisticated weaponry suite. It typically features a main armament of a high-caliber cannon capable of engaging both armored and soft targets. Additionally, secondary armaments, including machine guns and anti-aircraft systems, are often integrated to provide comprehensive defense. The vehicle's advanced targeting systems enhance its accuracy and effectiveness, allowing for precision strikes in high-pressure situations.

Protection is another critical aspect of the AMX R-3. The vehicle is constructed using advanced composite materials that offer superior ballistic resistance while maintaining a relatively light weight. Furthermore, it is equipped with active protection systems to detect and neutralize incoming threats, such as rockets and anti-tank guided missiles. This multi-layered defensive approach ensures the safety of the crew and extends the vehicle's operational life on the battlefield.

Technologically, the AMX R-3 incorporates cutting-edge systems for communication and navigation. An integrated battle management system keeps the crew informed about the battlefield dynamics in real-time, facilitating better coordination with other units. The vehicle also features advanced sensor suites that enhance situational awareness, enabling it to detect threats and targets from a distance.

Overall, the AMX R-3 is a formidable addition to any military's fleet. Its combination of mobility, firepower, and protection, along with advanced technological systems, makes it well-suited for modern warfare conditions. As armed forces continue to adapt to evolving threats, the AMX R-3 stands as a symbol of innovation and effectiveness in armored vehicle design.