AMX R-3 manual Irmode #, Jst, Numd, Reboot

Page 21

Programming The Mio R-3

Serial Commands (Cont.)

IRMODE #

Syntax:

Sets the IR transmission

IRMODE #

frequency to either 38 or

Variables:

455KHz

• <mode> =

 

 

38 - IR only, 38KHz

 

455 - IR only, 455KHz

 

ZIG - ZigBee only

 

ZIG38 - ZigBee + IR 38KHz

 

ZIG455 - ZigBee + IR 455KHz

 

Example:

 

IRMODE 455

 

Sets the IR transmission frequency to 455 KHz.

 

IRMODE ZIG

 

Sets the IR to disabled and communications to only use ZigBee.

 

IRMODE ZIG38

 

Sets the IR transmission frequency to 38KHz and configures for simultaneous

 

transmission on ZigBee.

 

 

^JST

Syntax:

Set text alignment using a

"'^JST-<variable text address range>,<new text

numeric keypad layout for

alignment>'"

those buttons with a defined

Variable:

address range

• variable text address range = 1; the address range corresponds to the

 

 

dynamic line number-only one line is supported on this device.

 

• new text alignment = Value of 1 - 9 corresponds to the following locations:

 

1, 4 or 7 = Left

 

2, 5 or 8 = Center

 

3, 6 or 9 = Right

 

Example:

 

SEND_COMMAND Panel,"'^JST-1,1'"

 

Sets the text alignment to the left side of the LCD button

 

Note: There is no vertical alignment.

 

 

NUMD

Syntax:

Sets the number of devices to

NUMD <numberOfDevices>

be controlled by the remote

Example:

 

 

NUMD 1

 

Sets the remote to control only one device.

 

 

REBOOT

Syntax:

Reboots the remote

REBOOT

 

Example:

 

REBOOT

 

Reboots the remote

 

 

Mio Modero R-3 Remote

17

 

 

Image 21
Contents Mio Modero R-3 AMX Limited Warranty and Disclaimer Table of Contents Table of Contents Mio Modero R-3 Remote Mio Modero R-3 OverviewTouch And Tilt Sensor FCC Compliance Overview Mio Modero R-3 Remote Battery Low Indicator Mio Modero R-3 SetupInternal Mio R-3 Components Installing Custom ButtonsSetup Mode Transmit ModeTimeout Adjustment Debug Mode Download ModeFirmware Version Device IDZigBee ID PAN, Channel, and System Connection Site Survey LED Sleep Mode BrightnessSetup Mode Mio Modero R-3 Remote Programming The Mio R-3 Using the Programming Jack on The Mio R-3Click Query for Devices Updating Mio R-3 FirmwareChannel Codes Channel CodesSelect @BRT Serial CommandsFML Irmode # RebootJST NumdSetd Revd #SHO SLEEP-#@SWK @SSTTXT UNIZAP ZigcZigp SendCommands CFGFML Sendcommand Panel,FML-1,D Sendcommand Panel,REBOOT Sleep Sendcommand Panel,@SST-Panel StartWake Programming The Mio R-3 Mio Modero R-3 Remote Mio Remote Charging Base SpecificationsFG148-04 Charging The Mio Remote with Charging BaseMio Remote Charging Base Mio Modero R-3 Remote It’s Your World Take Control

R-3 specifications

The AMX R-3 is an advanced armored vehicle that represents a significant step forward in military technology and design, primarily aimed at enhancing battlefield capabilities for modern armed forces. This vehicle's features combine mobility, firepower, and protection, making it a versatile asset in various combat scenarios.

One of the standout characteristics of the AMX R-3 is its mobility. Built on a rugged chassis, it is equipped with a powerful engine that allows for rapid movement across diverse terrains, including urban environments and rough landscapes. This mobility is crucial in modern warfare where speed can often dictate the outcome of engagements. The vehicle's suspension system is designed to absorb shocks from uneven surfaces, providing a stable platform for its crew and equipment.

In terms of firepower, the AMX R-3 is armed with a sophisticated weaponry suite. It typically features a main armament of a high-caliber cannon capable of engaging both armored and soft targets. Additionally, secondary armaments, including machine guns and anti-aircraft systems, are often integrated to provide comprehensive defense. The vehicle's advanced targeting systems enhance its accuracy and effectiveness, allowing for precision strikes in high-pressure situations.

Protection is another critical aspect of the AMX R-3. The vehicle is constructed using advanced composite materials that offer superior ballistic resistance while maintaining a relatively light weight. Furthermore, it is equipped with active protection systems to detect and neutralize incoming threats, such as rockets and anti-tank guided missiles. This multi-layered defensive approach ensures the safety of the crew and extends the vehicle's operational life on the battlefield.

Technologically, the AMX R-3 incorporates cutting-edge systems for communication and navigation. An integrated battle management system keeps the crew informed about the battlefield dynamics in real-time, facilitating better coordination with other units. The vehicle also features advanced sensor suites that enhance situational awareness, enabling it to detect threats and targets from a distance.

Overall, the AMX R-3 is a formidable addition to any military's fleet. Its combination of mobility, firepower, and protection, along with advanced technological systems, makes it well-suited for modern warfare conditions. As armed forces continue to adapt to evolving threats, the AMX R-3 stands as a symbol of innovation and effectiveness in armored vehicle design.