AMX R-3 manual Serial Commands, @Brt

Page 19

Programming The Mio R-3

Serial Commands

The Mio R-3 remote supports a few commands that can be uploaded to the device using a terminal program such as HyperTerminal. These commands are not needed for normal usage or programming of the remote.

Serial Commands

@BRT

This command can be used to customize the brightness of the red LEDs that

Set Brightness level

backlight the power button if the predefined brightnesses in Setup Mode are

not fine enough.

 

 

 

 

Syntax:

 

 

"'BRIT-<awake brightness level>,<sleep brightness

 

level>'"

 

 

Variables:

 

 

brightness level # = a value from 0 - 32.

 

"'@BRT-#'"

(Set LED Awake brightness level)

 

"'@BRT-#,#'"

(Set LED Awake brightness level, sleep brightness level)

 

Example:

 

 

(1) "'@BRT-16'"

 

Sets the awake brightness level to 50%.

 

 

 

^CFG #

Syntax:

 

Enable or Disable Debug

^CFG- <command value>

Mode

Variables:

 

 

 

 

• # = (1 = Debug Mode ON, 0 = Debug Mode OFF).

 

Example:

 

 

^CFG-1

 

 

Turn Debug Mode ON

 

 

 

Mio Modero R-3 Remote

15

 

 

Image 19
Contents Mio Modero R-3 AMX Limited Warranty and Disclaimer Table of Contents Table of Contents Mio Modero R-3 Remote Mio Modero R-3 OverviewTouch And Tilt Sensor FCC Compliance Overview Mio Modero R-3 Remote Battery Low Indicator Mio Modero R-3 SetupInternal Mio R-3 Components Installing Custom ButtonsTransmit Mode Setup ModeTimeout Adjustment Device ID Download ModeDebug Mode Firmware VersionZigBee ID PAN, Channel, and System Connection Site Survey LED Sleep Mode BrightnessSetup Mode Mio Modero R-3 Remote Programming The Mio R-3 Using the Programming Jack on The Mio R-3Click Query for Devices Updating Mio R-3 FirmwareChannel Codes Channel CodesSelect @BRT Serial CommandsFML Numd RebootIrmode # JSTSLEEP-# Revd #Setd SHOUNI @SST@SWK TXTZigc ZAPZigp CFG SendCommandsFML Sendcommand Panel,FML-1,D Sendcommand Panel,REBOOT Sleep Sendcommand Panel,@SST-Panel StartWake Programming The Mio R-3 Mio Modero R-3 Remote Mio Remote Charging Base SpecificationsFG148-04 Charging The Mio Remote with Charging BaseMio Remote Charging Base Mio Modero R-3 Remote It’s Your World Take Control

R-3 specifications

The AMX R-3 is an advanced armored vehicle that represents a significant step forward in military technology and design, primarily aimed at enhancing battlefield capabilities for modern armed forces. This vehicle's features combine mobility, firepower, and protection, making it a versatile asset in various combat scenarios.

One of the standout characteristics of the AMX R-3 is its mobility. Built on a rugged chassis, it is equipped with a powerful engine that allows for rapid movement across diverse terrains, including urban environments and rough landscapes. This mobility is crucial in modern warfare where speed can often dictate the outcome of engagements. The vehicle's suspension system is designed to absorb shocks from uneven surfaces, providing a stable platform for its crew and equipment.

In terms of firepower, the AMX R-3 is armed with a sophisticated weaponry suite. It typically features a main armament of a high-caliber cannon capable of engaging both armored and soft targets. Additionally, secondary armaments, including machine guns and anti-aircraft systems, are often integrated to provide comprehensive defense. The vehicle's advanced targeting systems enhance its accuracy and effectiveness, allowing for precision strikes in high-pressure situations.

Protection is another critical aspect of the AMX R-3. The vehicle is constructed using advanced composite materials that offer superior ballistic resistance while maintaining a relatively light weight. Furthermore, it is equipped with active protection systems to detect and neutralize incoming threats, such as rockets and anti-tank guided missiles. This multi-layered defensive approach ensures the safety of the crew and extends the vehicle's operational life on the battlefield.

Technologically, the AMX R-3 incorporates cutting-edge systems for communication and navigation. An integrated battle management system keeps the crew informed about the battlefield dynamics in real-time, facilitating better coordination with other units. The vehicle also features advanced sensor suites that enhance situational awareness, enabling it to detect threats and targets from a distance.

Overall, the AMX R-3 is a formidable addition to any military's fleet. Its combination of mobility, firepower, and protection, along with advanced technological systems, makes it well-suited for modern warfare conditions. As armed forces continue to adapt to evolving threats, the AMX R-3 stands as a symbol of innovation and effectiveness in armored vehicle design.