Searching for Your Code

Curtis Mathes	0300
Denon	0160
GE	0078
Harman/Kardon	0892
JVC	0331
Linn	0269
Luxman	0165
Magnavox	0269
Marantz	0269, 0321
Nakamichi	0321
Optimus	0013, 0300, 0395
Panasonic	0308
Philips	0269
Pioneer	0013, 0300
Realistic	0395
Sansui	0321
Shure	0264
Sony	0220, 0689
Soundesign	0078
Technics	0308
Victor	0331
Wards	0013, 0078
Yamaha	0354

If your TV, VCR or Cable Converter does not respond to the Cinema 7+™ after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code. For example, after trying all of the codes for your TV, you still cannot get the Cinema 7+™ to operate your TV, then:

1.Turn on your TV.

2. Press TV and release. Press and hold SETUP until the Cinema 7+™ ’s red light blinks twice, then release

SETUP.

3. Press 9 - 9 - 1.

4.Slowly alternate between pressing POWER* and TV until your TV turns OFF. Make sure that the Cinema 7+™ is aimed at your TV during the search. You may have to press this sequence of buttons (POWER* then TV) up to 100 times to search the entire library of codes.

5.When your TV turns OFF, press and release SETUP

to lock in the code for your TV. Your Cinema 7+™ is now programmed to operate your TV.

*If you are searching for your VCR, CD, LD or DVD Player code, you may want to play a tape or disk and use the STOP key instead of the POWER key to search for your code. When your VCR stops, press SETUP to lock in your code.

NOTE: To search for the codes of your other components, repeat Steps 1 through 5, only substitute the appropriate device key (ie., VCR, DVD/LD, RCVR, AUX, CD or CBL/SAT) for the component you are searching for.

RETRIEVING THE CODES PROGRAMMED INTO THE

Cinema 7+™

If you have set up the Cinema 7+™ using the “SEARCHING FOR YOUR CODE” procedure, you may want to figure out which four-digit code is operating your equipment. Use this procedure after you have set up your components to find out

Web Site : http://www.oneforall.com

which four-digit code is operating your equipment. For exam- ple, to find out which code is operating your TV after setting up your TV using the “SEARCHING FOR YOUR CODE” procedure:

1. Press TV and release. Press and hold SETUP until the Cinema 7+™ ’s red light blinks twice, then release

SETUP.

2. Press 9 - 9 - 0.

3. For the first digit of your four-digit code, press 1 and count the number of times the red light (LED) blinks on the Cinema 7+™ . If the light does not blink when you press the number 1, the digit is zero.

4. For the second digit, press 2 and count the number of times the red light (LED) blinks on the Cinema 7+™ . If the light does not blink when you press the number 2, the digit is zero.

5. For the third digit, press 3 and count the number of times the red light (LED) blinks on the Cinema 7+™ . If the light does not blink when you press the num- ber 3, the digit is zero.

6. For the fourth and final digit, press 4 and count the number of times the red light (LED) blinks on the Cinema 7+™ . If the light does not blink when you press the number 4, the digit is zero. Now you have your four-digit code.

NOTE: To find out the code for your other components, repeat Steps 1 through 6, only substitute the appropriate device key (VCR, DVD/LD, RCVR, AUX, CD or CBL/SAT) for the component code you wish to learn.

LEARNING FUNCTIONS ONTO THE 1L, 2L, 3L AND 4L

KEYS

The 1L, 2L, 3L and 4L keys can be used to customize those functions that are unique to your home entertainment needs. For example, the Cinema 7+™ does not offerTracking Up or Down for a VCR. With the learning feature on the Cinema 7+™ , you can add these functions and many others learned from your original remote control.

NOTE: Please have your original remote controls handy before performing learning on the Cinema 7+™.

1. Press and hold SETUP until the Cinema 7+™ ’s red light blinks twice, then release SETUP.

2. Press 9 - 7 - 5. The Cinema 7+™ ’s red light will blink twice.

3.Press and release the Device key in which you want to learn a feature (e.g., TV).

Web Site : http://www.oneforall.com