Denon | 0059 |
Mitsubishi | 0059 |
NAD | 0059 |
Pioneer | 0059 |
Sony | 0193, 0201 |
Programming the Cinema 7+™ to operate your
Receiver/Tuner:
Locate the brand name of your Receiver/Tuner in the “Setup Codes For Receiver/Tuners” section (starting below), and write it in below.
Receiver/Tuner Brand: ______________________
The brands are listed in alphabetical order with the most popular codes listed first. You will use one of these codes to program your Cinema 7+™ to operate your Receiver/Tuner as follows:
1.
Turn on your Receiver/Tuner.
2.
Press RCVR and release. Press and hold SETUP until the Cinema 7+™ ’s red light blinks twice, then release SETUP.
3.Enter the first
digit.
4.Aim the Cinema 7+™ at your Receiver/Tuner and press POWER. The unit should turn off. If it does not respond, repeat steps
NOTE: If the unit still does not respond, try using the search method on page 22.
5. | Your Cinema 7+™ is now programmed to operate |
| your Receiver/Tuner. Write your Receiver/Tuner code |
| in the boxes to the left for future reference. |
Remember, to use your Cinema 7+™ to operate your Receiver/Tuner, press the RCVR key first.
Setup Codes For Receivers/Tuners
ADC | 0531 |
Akai | 0076 |
Aiwa | 0121, 0158, 0189, 0405 |
Bang & Olufsen | 0898 |
Capetronic | 0531 |
Carver | 0008, 0042, 0189, 0360 |
Casio | 0195 |
Clarinette | 0195 |
Curtis Mathes | 0039, 0080 |
Denon | 0004 |
Fisher | 0042, 0360 |
Garrard | 0463 |
Harman/Kardon | 0110, 0891, 0189 |
JBL | 0110 |
JVC | 0074 |
Kenwood | 0027, 0313, 0314, 0186, 0042 |
Linn | 0189 |
Lloyd’s | 0195 |
LXI | 0181 |
Magnavox | 0189, 0195, 0531, 0391 |
Marantz | 0039, 0189 |
MCS | 0039 |
Web Site : http://www.oneforall.com
Modulaire | 0195 |
NAD | 0320 |
Nakamichi | 0097 |
Onkyo | 0135, 0380 |
Optimus | 0042, 0080, 0181, 0186, 0531, 0670, 0738, 0801 |
Panasonic | 0039, 0309, 0518 |
Setup Codes For Receivers/Tuners (continued) | |
Penney | 0195 |
Philips | 0189 |
Pioneer | 0014*, 0080*, 0150, 0531, 0630, 1023 |
Quasar | 0039 |
RCA | 0054, 0360, 0531, 0530 |
Realistic | 0181, 0195 |
Sansui | 0189 |
Scott | 0322 |
Sharp | 0186 |
Sherwood | 0491, 0502 |
Sony | 0158**, 0474 |
Soundesign | 0670 |
TEAC | 0463 |
Technics | 0039, 0309, 0518 |
Victor | 0074 |
Wards | 0014, 0042, 0054, 0080, 0158, 0189 |
Yamaha | 0176, 0186 |
Yorx | 0195 |
Zenith | 0857 |
*May use Amplifier code 0013 for power and volume. See page 21 for ampli- fier setup and codes.
**May use Misc. Audio code 0159 to operate surround and tuner presets. See page 24 for misc. audio setup and codes.
Programming the Cinema 7+™ to operate your CD Player:
Locate the brand name of your CD Player in the “Setup Codes For CD Players” section (starting on the next page), and write it in the space below.
CD Player Brand: __________________________
The brands are listed in alphabetical order with the most popular codes listed first. You will use one of these codes to program your Cinema 7+™ to operate your CD Player as fol- lows:
1.Turn on your CD Player and insert a disc.
2.Press CD and release. Press and hold SETUP until the Cinema 7+™ ’s red light blinks twice, then release SETUP.
3.Enter the first
4.Aim the Cinema 7+™ at your CD Player and press PL (Play). Your CD Player should play your disc. If it does not respond, repeat steps
| NOTE: If you have tried all the codes listed for your |
| brand and your CD Player does not respond, try |
| using the search method found on page 22. |
5. | Your Cinema 7+™ is now programmed to operate |
| your CD Player. Write your CD Player code in the |
Web Site : http://www.oneforall.com
16 | 17 |