Universal Electronics M11055BS manual Locking Volume Control To One Mode Global Volume Lock

Press VOL+ once. The last-selected device key will blink four times.

On the remote control, press and hold SETUP until the last-selected device key blinks twice.

Performing these instructions will set inde- pendent volume control for all programmed devices.

3.Press VOL- once. The last-selected device key will blink four times.

4.Repeat steps 1 through 3 for each device you want volume to be unlocked.

Now, after you select a device that has volume unlocked (e.g., CBL), pressing VOL+, VOL-,or MUTE, will control only that device’s volume.

Unlocking All Volume Control (Global Volume Unlock) NOTE:

1.

2.Enter 9 9 3. The last-selected device key will blink twice.

3.

Locking Volume Control To One Mode (Global Volume Lock)

NOTE: The audio mode’s volume controls are active regardless of Volume Lock settings. However, if you lock the volume controls to the AUD mode, you will control the audio device’s vol- ume in all other modes (i.e., AUX, DVD, TV, or CBL). This can be an advantage if, for exam- ple, you always listen to home entertainment devices through your receiver’s speakers.

1.On the remote control, press and hold SETUP until the last-selected device key blinks twice.

2.Enter 9 9 3. The last-selected device key will blink twice.

3.Select a mode (e.g., TV or AUD) which you want to use to control the volume. The selected device key will blink twice.

Now, when you press VOL+, VOL-,or MUTE, the volume of the selected device (e.g., TV) is controlled regardless of mode.

www.urcsupport.com

17