SETUP CODES FOR CABLE CONVERTERS | SETUP CODES FOR DBS RECEIVERS |
ABC 0003, 0008 | Echostar 0775, 1005 |
Americast 0899 | Expressvu 0775 |
Bell South 0899 | GE 0566 |
General Instrument 0476 | General Instrument 0869, 0892 |
GoldStar 0144 | HTS 0775 |
Hamlin 0273 | Hughes Network Sys. 0749 |
Jerrold 0003, 0476 | JVC 0775 |
Memorex 0000 | Mitsubishi 0749 |
Panasonic 0000 | Next Level 0869, 0892 |
Paragon 0000 | Philips 0749, 1076 |
Philips 0305 | Proscan 0392 |
Pioneer 0144, 0877, 0533 | RCA 0566, 0392 |
Pioneer 0533 | RadioShack 0869 |
Pulsar 0000 | Samsung 1109 |
Quasar 0000 | Sony 0639 |
Regal 0273 | Star Choice 0869 |
Runco 0000 | Toshiba 0749 |
Samsung 0144 |
|
Scientific Atlanta 0008, 0477, 0877 |
|
Starcom 0003 |
|
Toshiba 0000 |
|
Zenith 0525, 0000, 0899 |
|
PROGRAMMING CHANNEL CONTROL LOCK
By activating this feature, the Millennium 4 will only allow access to the channel control capabilities of your cable converter. This will guarantee that you do not inadvertently change the channel on your TV or VCR.
To Activate Channel Control Lock:
1.On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP.
2.Enter 9 - 9 - 6.The LED will blink twice.
3.Press CH+ once. The LED will blink twice.
4.Now, regardless of what mode you select (i.e., TV, VCR, or CBL), only the channel control capability of your cable converter will be accessible.
NOTE: This feature does not affect the Audio mode.
To De-Activate Channel Control Lock:
1.On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP.
2.Enter 9 - 9 - 6.The LED will blink twice.
3.Press CH- once. The LED will blink twice.
4.The Millennium 4 will again provide TV and VCR channel control capabilities while in the TV or VCR mode.
Page 10 of 15