Universal Electronics Millennium 4 manual Programming TV/VCR Combo Control

Page 8

PROGRAMMING TV/VCR COMBO CONTROL

Locate the brand name of your TV/VCR Combo in Setup Codes for TV/VCR Combos below, and write it in the space below.

TV/VCR Combo Brand: ________________________

The brands are listed in alphabetical order with popular codes listed first. You will use one of these codes to program the Millennium

4 to operate your TV/VCR Combo:

1.Turn on your TV/VCR Combo and insert a video cassette.

2.On the Millennium 4, press VCR once. Press and hold SETUP until the LED blinks twice, then release SETUP.

3.Enter the first four-digit code for your TV/VCR Combo. If you perform this procedure correctly, the LED will blink twice.

NOTE: If the LED did not blink twice after entering the code’s last digit, then repeat steps 2 through 3 and try entering the same code again.

4.Aim the Millennium 4 at your TV/VCR Combo and press POWER once. The unit should turn off. If it does not respond, repeat steps 2-3, trying each code listed for your brand until you find one that works. If it still does not work, try searching for the code (see Searching For Your Code on page 12).

5.If you’ve found a TV/VCR setup code that works your TV/VCR Combo and a separate TV code is also listed, you’ll need to program this code into the Millennium 4 to access volume control (see Programming TV Control on page 8). If there is no separate TV code listed, you will need to perform the following steps to access volume control:

a.Press and hold SETUP until the LED blinks twice, then release SETUP.

b.Enter 9 - 9 - 3.The LED will blink twice.

c.Press VCR once. The LED will blink twice.

6.Write your TV/VCR Combo code in the boxes below for future reference.

NOTE: Remember, to use the Millennium 4 to operate your TV/VCR Combo, press VCR first.

SETUP CODES FOR TV/VCR COMBOs:

American High 0035 (for TV use 0051) Brocksonic 0002, 0294,

Colt 0072

Curtis Mathis 0035 (for TV use 0051) Daewoo 0278

Emerson 0002, 0294, 0479 Funai 0000

GE 0035 (for TV use 0051), 0060 (for TV use 0047), 0048 (for TV use 0093), 0240

Hitachi 0035 (for TV use 0051), 0000 HQ 0000

Lloyds 0000

MGA 0240

Magnavox 0081 (for TV use 0054), 0035 (for TV use 0051), 0000 Magnin 0240

Memorex 0037, 0162 (for TV use 0250) Mitsubishi 0048 (for TV use 0093) Orion 0002, 0294, 0479

Panasonic 0035 (for TV use 0051), 0162 (for TV use 0250) Penney 0035 (for TV use 0051), 0240, 0162 (for TV use 0250) Quasar 0035 (for TV use 0051), 0162 (for TV use 0250)

RCA 0060 (for TV use 0047), 0035 (for TV use 0051), 0048 (for TV use 0093)

Sansui 0000, 0479 Sanyo 0240 Sears 0000, 0037

Sharp 0048 (for TV use 0093) Sony 0032 (for TV use 0000) Symphonic 0000

Zenith 0000

Page 8 of 15

Image 8
Contents Table of Contents Introduction Features and Functions Key ChartsInstalling Batteries Programming TV ControlSetup Codes for TVs Programming VCR/DVD Player Control Setup Codes for VCRs Setup Codes for TV/VCR COMBOs Programming TV/VCR Combo ControlProgramming Cable Converter or DBS Receiver Control To Unlock the CBL KeyTo Program the CBL Key To Lock the CBL KeyTo De-Activate Channel Control Lock Programming Channel Control LockTo Activate Channel Control Lock Programming Audio Control Searching for Your Code Checking the CodesTo Clear a Tune-In Key Programming the TUNE-IN Keys for Specific ChannelsTo Program a Tune-In Key Changing Volume Lock RE-ASSIGNING Device KeysTroubleshooting Additional Information