Sony MHC-GX8000/RG77 Recording to a tape, To select Tape a, Load the CD you want to

Recording to a tape

––CD Synchro Recording/High Speed Dubbing/Recording Manually/ Program Edit

You can record from a CD, tape, radio or other connected component. The recording level is adjusted automatically.

Steps	Recording from a CD	Recording from a tape	Recording Manually
	(CD Synchro Recording)	(High-Speed Dubbing)
1	Insert a recordable tape into deck B.
				Tape
2	Press CD.	Press TAPE A/B repeatedly	Press a function button
		to select TAPE A.	for the recording source.
3	Load the CD you want to	Load the tape you want to	Load the CD or tape
	record.	record into deck A.	(or other audio
			sources), or tune to the
			station you want to
			record.
4	Press CD SYNC HI-DUB.		Press REC PAUSE/
			START.
	DECK B stands by for recording.
	REC PAUSE/START indicator flashes.
5	Press DIRECTION repeatedly to select gto record on one side.
	Select j(or RELAY) to record on both sides.
6	Press REC PAUSE/START. If you are recording manually, press hH to start
	playing the source (for CD or Tape).
	Recording starts.
7	Press x to stop recording.

Tips

•When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side.

•For recording from the reverse side:

After step 1, press TAPE A/B to select deck B and press hH twice to start playback of the reverse side. Press x at the point where you want to start recording. The TAPE B reverse side indicator lights up.

•(High-Speed Dubbing only)

If you set direction to jwhen the tapes you use have different lengths, the tapes in each deck reverses independently. If you select RELAY, the tapes in both decks reverse together.

•For recording from the radio:

If noise is heard while recording from the radio, move the respective antenna to reduce the noise.

•For recording from a CD to a tape manually:

You can press . or > to select tracks during recording pause mode (after step 4 and before step 6).

•You can mix the sound from the component connected to the GAME INPUT jacks with another function such as CD, tape, radio or an MD connected to this system. To record the mixed sound, press GAME MIXING after step 4 of “Recording Manually” and then press REC PAUSE/START to start recording. Game Mixing does not function during High-Speed Dubbing and CD Synchro Recording.

Note

You cannot listen to other sources while recording.

continued

13GB

MHC-RG77 4-238-409-13(1)