Sony MHC-GX8000/RG77 Timer-recording radio Programs, Recording a CD by specifying track order

Page 14
Tune in the preset radio station (see “Listening to the radio” on page 11).

Recording to a tape (continued)

Recording a CD by specifying track order

—Program Edit

You can record tracks from all the CDs in the order you want. When programing, make sure the playing times for each side do not exceed the length of one side of the tape.

1 Insert a recordable tape into deck B, then press CD.

2 Press PLAY MODE repeatedly until “PROGRAM” appears in the display.

3 Press one of the DISC 1–3 button to select a CD.

To program all the tracks on a CD at once, proceed to step 6 while “AL” appears in the display.

4 Press . or > repeatedly until the tracks you want appears in the display.

5 Press ENTER.

The track(s) is (are) programmed. The program step number appears, followed by the total playing time.

6 To program additional tracks, repeat steps 3 to 5.

Skip step 3 to select tracks from the same disc.

7 Press CD SYNC HI-DUB.

Deck B standby for recording. The REC

PAUSE/START indicator flashes.

8 Press DIRECTION repeatedly to select

gto record on one side. Select j (or RELAY) to record on both sides.

9 Press REC PAUSE/START.

Recording starts.

14GB

To

Do This

Cancel Program Edit

Press PLAY MODE

 

repeatedly until “1 DISC” or

 

“ALL DISCS” appears in

 

the display.

 

 

Clear a track from

Press CLEAR on the remote

the end

when playback is stopped.

 

 

Tip

To check the required tape length for recording a CD, press EDIT after you have loaded a CD and pressed CD. The required tape length for the currently selected CD appears, followed by the total playing time for side A and side B respectively (Tape Select Edit).

Note

You cannot use Tape Select Edit for discs containing over 20 tracks.

Timer-recording radio

programs

To timer-record, you must preset the radio station (see “Presetting radio stations” on page 11) and set the clock (see “Setting the clock” on page 8) beforehand.

1

2 Press CLOCK/TIMER SET on the remote.

“DAILY1 SET” appears.

3 Press V or v repeatedly to select “REC SET”, then press ENTER.

“ON” appears and the hour indication flash in the display.

4 Set the time to start recording.

Press V or v repeatedly to set the hour, then press ENTER.

The minute indication starts flashing. Press V or v repeatedly to set the minute, then press ENTER.

The hour indication flashes again.

MHC-RG77 4-238-409-13(1)

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Mini Hi-Fi Component System MHC-RG77About this manual Table of Contents Main unit How to use thisSurround Speaker Mode Spectrum 8Remote Control 1Connect the front speakers 3Connect the FM and AM antennas Set up the AM loop antenna, then connect itHooking up the system Connect the speaker cords to Surround Speaker jacksTo attach the speaker pads Connect the power cord to a wall outletTo connect optional components Positioning the speakersInserting two size AA R6 Batteries into the remote Setting the clockTurn on the system Press CLOCK/TIMER SET on the remote Press V or v repeatedly to selectOther Operations Loading the CDPlaying the CD Normal Play/Shuffle Play/Repeat PlayProgram Play Programming the CD TracksPlaying the CD To listen to non-preset radio stations Presetting radio stationsPreset Tuning Listening to the radioPress hH again to play the reverse side Loading a tapePlaying a tape Searching for the beginning of a track AMSLoad the CD you want to Recording to a tapeTo select Tape a Press x to stop recordingRecording to a tape Timer-recording radio ProgramsRecording a CD by specifying track order Program EditEnter Turn off the powerMake sure the tape is in forward direction Selecting the speaker System Adjusting the soundSelecting the preset Effect To call up the personal file Sound AdjustmentSelecting the surround Effect Press SurroundSound Adjusting the brightness DisplayChanging the spectrum Analyzer display Mixing the soundFalling asleep to music Sleep TimerSinging along Press Sleep on the remoteWaking up to music Daily TimerAdjust the volume Press CLOCK/TIMER SET on the remote Prepare the music source you want to playTurning off the display Using the displayPower Saving Mode Video Connecting an MD deck Or VCRConnecting a Video Game Player FM antenna Connecting external AntennasConnect an external antenna to improve the reception AM antennaSpeakers Problems and remediesGeneral CD Player Tape DeckPrecautions Amplifier section SpecificationsMHC-GX8000 USA model only CD player sectionGeneral SpecificationsSpeaker MHC-RG66T
Top Page Image Contents