Home Theater Direct MX-500 manual Erasing Favorite Channel Buttons

Page 19

8. Erasing Existing Programming

8.Press a single button if you wish to erase individual buttons one at a time. This will show all the functions in the device. Press the button you wish to erase.

9.Repeat from Step #5 to erase any other devices or learned buttons you require.

10.Press the MAIN button to exit to main Erase mode. Press the MAIN button once again to exit the SETUP mode.

B. Erasing Favorite Channel Buttons

1.Go to the SETUP mode by pressing both the MAIN and ENTER buttons simultaneously for three seconds.

2.Press the ERASE button next to the LCD screen.

3.Press the FAV button.

4.If you wish to erase all the favorite channel buttons in the MX-500TM, press the ALL button and then press the SURE? button at the next LCD screen.

5.If you wish to erase one button, press the KEY button. Press the individual button you want to erase and continue with any other individual buttons you want to erase.

6.Repeat from Step #5 to erase any favorite channel buttons you require.

8. Erasing Existing Programming

7.Press the MAIN button to exit to main Erase mode.

8.Press the MAIN button once again to exit the SETUP mode.

C. Erasing Macro Functions

1.Erase M1, M2, M3, POWER and SYSTEM OFF Buttons

1.Go to the SETUP mode by pressing both the MAIN and ENTER buttons simultaneously for three seconds.

2.Press the ERASE button next to the LCD screen.

3.Press the MACRO button.

4.If you wish to erase all of the macro buttons in the

MX-500TM, press the ALL button and then press the SURE? button at the next LCD screen.

5.If you wish to erase just one of the macros, press the KEY button at step 4 and then one of the M1, M2, M3, POWER or SYSTEM OFF buttons to erase the macro functions from that button.

6.Repeat from Step #5 to erase any other macro buttons you require.

7.Press the MAIN button to exit to main Erase mode. Press the MAIN button once again to exit the SETUP mode.

35

36

Page 18 Page 20
Image 19
Page 18 Page 20
Contents MX-500ª Operating Manual Table of Contents Introduction Summary of Operations BatteriesFavorite Channel Buttons Learning From Other Remote Controls Macro OperationsM1, M2, M3, Power and System OFF Buttons Ten Device ButtonsLCD Screen And Button Layout Editing LCD TextCloning The MX-500TM All Other OperationsWhere do I START? System SettingsUsing Preprogrammed Codes Three-Digit Code Number Auto Scan With Three-Digit Number Programming the MX-500TMto Control Your Components Points to Remember Learning MethodProgramming The Function Buttons Programming The Ten Device Buttons Programming Favorite Channels Programming Macro Buttons Programming Macro Functions To The Ten Device Buttons Press CABLE. This takes you to the Cable device Programming Punch Through Functions Erasing Learned Buttons Erasing Existing ProgrammingErasing Favorite Channel Buttons Erasing Punch Through Functions Erase Macro Functions In The Ten Device ButtonsTo Create or Edit Text on Function Device Buttons LCD Button EditingTo Create Or Edit Text for Favorite Channel Buttons + etc Setting BacklightCloning MX-500ª Adjustment of LCD ContrastComponent See device Low Battery MessageMemory Lock GlossaryGlossary Pause See Delay Specifications WarrantyAudio List of Preprogrammed LCD Text by DeviceCable Three-Digit Preprogrammed Code Table Set-Up Code TableAudio SAT Admiral VCR DVD CableCalifornia Audio Tape AUX AUX Light, Switch, Tivo, etc
Top Page Image Contents