7. Programming Punch Through Functions
For example, for VOL you are punching through the controls of the Audio receiver's VOL to the TV or Cable box, enabling you to control the Audio receiver's VOL when in the TV or Cable box screen.
6.Punch Through is saved when the second device is pressed.
7.Repeat from Step #2 to program Punch Through for other devices.
8.Once you complete the programming and wish to exit from this mode, press the MAIN button. Exit from the SET UP mode by pressing the MAIN button once again.
Tip: When using Punch Through, think of the first Device you select as the Device that now controls the functions, and think of the second Device as the device that you want to control those functions. You are taking the controls of the second device and Òpunching them throughÓ to the first device.
8. Erasing Existing Programming
A. Erasing Learned Buttons
1.Go to the SETUP mode by pressing both the MAIN and ENTER buttons simultaneously for three seconds.
2.Press the ERASE button next to the LCD screen.
3.Press the LEARN button.
4.If you wish to erase all the learned functions in the
5.If you wish to erase all the buttons in a single device or an individual button in the device, press the DEVICE button.
6.Press the device button (TV, VCR, Audio, etc.) to erase the button(s) from the device.
Tip: Press the PAGE button and then press the DEVICE button (TV, VCR, Audio, etc.) to erase the learned function in the device button itself. Programming this learned function to the Device button was explained in ÒProgramming the Ten Device ButtonsÓ earlier.
7.Press the ALL button if you wish to erase all the learned buttons in the device and press the SURE? button at the next LCD screen.
33 | 34 |