X10 Wireless Technology IR34A owner manual Learning Side Keys, Learning Macros Side Keys

Page 17

Learning Side Keys, cont.

Learning Macros (Side Keys)

E.g., in this example we pressed the 3 key on the remote to enter the letter D. Then we pressed the 8 key repeatedly until the letter V was displayed. Then we waited for a second and pressed 3 to select D. Then we pressed the 0 (zero) key twice until we selected a space. We continued this process until we had “DVD Zoom” displayed.

Press OK to save the new label for the key we just learned.

The next time you set the remote to the mode that you learned this key under, you’ll see a screen where you can select this and any other functions you’ve learned under that mode.

Pressing the MODE key and then selecting a device type shows the “extra” keys and learned keys for that mode. Note, you can learn keys from any kind of remote under any mode. You could for example learn the power keys for your TV, and your audio system and extra keys for your DVD player under the DVD mode. Then, when you press the MODE key and se- lect DVD, you’ll be able to turn on your TV, turn on your audio system, and control your DVD player, all from the Side Keys on this one screen.

Note: “Triple tap” name entry works in a similar fashion to text entry on a cell phone. Tap each numeric key to cycle through ALL caps, numbers, and lower case letters. E.g., repeatedly pressing the number 2 key cycles through A, B, C, 2, a, b, c. Pressing the 9 key cycles through W, X, Y, Z, 9, w, x, y, z.

A “space” can be selected with the 0 (zero) key. The number 1 key selects 1 . @ ? ! - & : and back to 1. And you can backspace an entry with the key to the left of the 0 (zero) key. Press OK (or the Enter “E” key) to confirm your new name.

32

A Macro could include the Power key for your TV, followed by the Power key for your Cable box, followed (after a 2 second delay), by digit 4 from your cable remote. Then, when you later activate this Macro, it will turn on your TV, turn on your cable box, wait 2 seconds, and then set the cable box to channel 4.

At the Home screen press the Side Key next to Learn.

Then press any Side Key K1-K5 to the left to learn a Macro that you’ll save to a Side Key (and later rename it if desired).

Select the device you want to learn keys for. In this example we only have a TV, Cable Box and Satellite Receiver set up, so the rest are grayed out, but you can still select any of the devices to learn commands for. E.g., in this case we selected DVR.

Then select the Side Key that you want to store the Macro under, for example, L3.

33

Image 17
Contents IconRemote FCC Caution Safety ConsiderationsIntroduction Table of ContentsLCD Liquid Crystal Display Hard Key Functions Hard Key Functions,Battery Installation SetupBattery Saver Using the WizardSetting Up Your Devices, Setting Up Your DevicesHow to set up a TV Setting Up Your Favorites, Setting Up Your FavoritesDescription Setting Up Your Favorites, Setting Up X10 DevicesSetting Up Your Remote to Send RF commands Select Pick Device Setting Up X10 Devices,Using The Remote Setting up an LM465 Lamp Module exampleExtended Features X10 RF DevicesLabeling Feature Using The Remote,Select Home/Setup/X10/More/Sleep Macro Sleep Macro StepsQuickPower Mode KeySleep Macro Steps, Favorite KeyLearning SleepLearning, Learning Main Keys Macros Main Keys, Learning Main Keys,Learning a Macro Main Keys Learning Side Keys, Learning Side KeysLearning Side Keys, Learning Macros Side Keys Learning Macros, Setting up more Devices Setting up moreSetting up more, Setting up more FavoritesReordering Favorites Adding/Editing FavoritesRenaming Favorite Groups Deleting FavoritesAdvanced Settings Clearing Settings in the RemoteOptions Device CodesProgramming Combo Device Codes Advanced Settings,Punchthrough Punchthrough,Advanced, then KidSafe KidSafeX10 Home Control Deleting X10 Favorites X10 MacrosX10 Macros, Voice Dialer Security Console Audio and Video CompatibilityMonth Limited Warranty TroubleshootingPage IR34A-6/10