X10 Wireless Technology IR34A Learning Main Keys, Learning a Macro Main Keys, Macros Main Keys

Page 15

Learning Main Keys, cont.

Press and hold (in this example) the Power key on the other remote until the display shows that the command has been successfully learned. Note for some types of keys you might need to hold the key pressed, but for other types a quick press is sufficient. Experiment a bit. If keys you learn are sent multiple times try learning them with just a quick press. (See Tips on Learning on page 25.)

If the screen says Failure, you can press the key and try again.

You can continue learning more individual keys by following the instructions on the screen, and then press Done when you’re finished. Or you can press Add Key to Macro (see below and next page).

Learning a Macro - Main Keys

At this screen you can select Add Key to a Macro. Instead of learning another “separate” key, the next key you learn will be added to a Macro. This Macro will be activated by the key that you learned the first command under. E.g., you could press Power and learn the power command from your TV’s remote, then select Add Key to Macro, and press the 3 key and learn the channel 3 key from your TV’s remote. Then the Macro stored under the Power key will turn on the TV and change the channel to number 3.

28

Macros - Main Keys, cont.

Before learning the second key in the Macro, you can set a delay (1-10 sec.) after which the command stored in the Macro will be sent. For example, your TV might require a few seconds after turning it on before it will respond to a Channel Up/Down command. (Repeatedly press the Side Key next to Set Delay or enter the delay directly with the numeric keys, 0-9.)

In this case let’s set a 1 second delay between commands. Then point your existing remote at the bottom of the IR34A remote; press OK when you’re ready.

You then press the second key on your original remote that you want to add to the Macro.

When success is displayed you can continue adding keys to the Macro and then press Done when you’re finished.

29

Page 14 Page 16
Image 15
Page 14 Page 16
Contents IconRemote FCC Caution Safety ConsiderationsIntroduction Table of ContentsLCD Liquid Crystal Display Hard Key Functions Hard Key Functions,Using the Wizard SetupBattery Installation Battery SaverSetting Up Your Devices How to set up a TVSetting Up Your Devices, Setting Up Your Favorites, Setting Up Your FavoritesSetting Up Your Favorites, Setting Up X10 Devices Setting Up Your Remote to Send RF commandsDescription Select Pick Device Setting Up X10 Devices,X10 RF Devices Setting up an LM465 Lamp Module exampleUsing The Remote Extended FeaturesSleep Macro Steps Using The Remote,Labeling Feature Select Home/Setup/X10/More/Sleep MacroFavorite Key Mode KeyQuickPower Sleep Macro Steps,Learning SleepLearning, Learning Main Keys Learning Main Keys, Learning a Macro Main KeysMacros Main Keys, Learning Side Keys, Learning Side KeysLearning Side Keys, Learning Macros Side Keys Learning Macros, Setting up more Favorites Setting up moreSetting up more Devices Setting up more,Reordering Favorites Adding/Editing FavoritesRenaming Favorite Groups Deleting FavoritesDevice Codes Clearing Settings in the RemoteAdvanced Settings OptionsPunchthrough, Advanced Settings,Programming Combo Device Codes PunchthroughKidSafe X10 Home ControlAdvanced, then KidSafe X10 Macros X10 Macros,Deleting X10 Favorites Voice Dialer Security Console Audio and Video CompatibilityMonth Limited Warranty TroubleshootingPage IR34A-6/10
Top Page Image Contents