Classic Electronics 1F manual Key-Lock, LOW Battery Warning

Page 7

GB

KEY-LOCK

You can lock one or more buttons on your smart 1F.

1)Press and hold down the STANDBY key on the smart 1F and at the same time press and hold down the red Text key. Keep both keys pressed

down for approximately 5 seconds until the indicator light on the STANDBY key being held down lights and remains on. Release both keys.

2)Press the key to be locked.

3)The STANDBY key blinks 1x.

4)Press the STANDBY key again.

5)The STANDBY key blinks 3x. The key is locked.

You can release locked keys again.

1)Press and hold down the STANDBY key on the smart 1F and at the same time press and hold down the red Text key. Keep both keys pressed down for approximately 5 seconds until the indicator light on the STANDBY key being held down lights and remains on. Release both keys.

2)Press the key to be released 2 times

3)The STANDBY key blinks 1x.

4)Press the STANDBY key again.

5)The STANDBY key blinks 3x. The key is released again.

LOW BATTERY WARNING

Whenever the batteries in the smart 1F fall to a low level the STANDBY key will blink 5 times each time the STANDBY key is pressed.

This indicates that you should replace the batteries as soon as possible. smart 1F may stop operation but will never lose installed codes because of its flash-memory.

7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

smart1F.indd 7

 

 

01.10.2008 10:20:29 Uhr

Image 7
Contents Smart1F.indd 01.10.2008 102028 Uhr Einstellung MIT 3-STELLIGEM Gerätecode BedienungsanleitungEinsetzen DER Batterien Einstellung DES smart 1FAuslesen DES Eingestellten Codes Einstellung MIT CODE-SUCHLAUF Batterie Warnung Tastensperre KEY-LOCKInserting the Batteries Setting UP Your smart 1FSET UP by Entering a 3 Digit Device Code User InstructionsRead OUT the Stored Code Number SET UP by Using the Library Search FacilityKEY-LOCK LOW Battery WarningAjuste CON EL Código DE 3 Posiciones Manual DE InstruccionesInsertar LAS Pilas Ajuste DEL smart 1FLectura DEL Código Ajustado Ajuste CON Búsqueda Automática DE CódigosAviso DE Batería Bloquear TeclasReglage a L’AIDE DU Code a Trois Chiffres Mode D’EMPLOIInstallation DES Piles Reglage DE LA smart 1FLecture DU Code Enregistre Reglage a L’AIDE DE LA Recherche Automatique DE CodeNotification SUR LA Batterie Bloquer DES TouchesProgrammazione Utilizzando IL Codice a 3 Cifre Istruzioni D’USOInserimento Delle Pile Messa a Punto DEL Vostro smart 1FPER Leggere IL Numero Memorizzato Avvertimento DI Batterie Scariche Blocco TastiProgramar Dando Entrada do Código DE 3 Dígitos Manual DE InstruçõesInserir Pilhas Programar O SEU smart 1FLER O Código Memorizado Programar Utilizanto a Busca AutomáticaAviso DE Pilhas Fracas Bloqueio DAS TeclasSmart1F.indd 01.10.2008 102031 Uhr