![](/images/new-backgrounds/1278873/27887327x1.webp)
Your Detector
Installation
Remote Display Unit (RDU)
Battery Installation
•
1.Turn RDU over and slide
battery cover off of RDU body.
2.Carefully plug battery wire connector into the battery connection port in RDU.
Connector only fits one way.
3. Replace battery cover.
Battery Charging
The unit is shipped with a sealed
IMPORTANT: Avoid temperature extremes (hot and/or cold) to help prolong battery life and performance. DO NOT leave RDU exposed to direct sunlight. If the RDU is mounted on vent, clip must be on lower fin to avoid hot air blowing on RDU battery compartment.
NOTE: When battery begins to discharge too quickly, it is time to install a new battery.
10 English