Your Detector
Settings
Setting IntelliMute
From the IntelliMute Setup screen:
1.Press MUTE/ button to start setup.
2.Press and hold the vehicle accelerator at desired engine RPMs.
3.Press DIM/button to complete setting process.
System stores engine RPM setting and displays a completion message and a tone or voice message. Unit must sense a usable pulse within three seconds or a set RPM point within 30 seconds of beginning of setup, or IntelliMute detects an error and turns off.
Change a set activation point by accessing Set IntelliMute in User Settings Programming. Repeat
Auto Mute Mode
When Auto Mute is on, it automatically reduces the audio volume of all alerts after they have sounded for four seconds. The signals will remain muted for as long as the signal is detected. When Auto Mute is off, the alerts will sound at full volume for as long as the signal is detected. The factory setting for Auto Mute is On. Press MUTE/to toggle between Auto Mute vs. Manual Mute.
Voice or Tone Mode
Set detector to sound alerts and confirm program settings with a Voice or a Tone. Voice Alert provides voice messages in addition to tones. Tone Alert provides tones only. Factory setting is Voice Alert.
Remote Display Unit (RDU) Beep Level
RDU Beep sets the volume level for the keypad confirmation tones of the RDU. Choose from low, high or off RDU beep level volumes.
RDU Display Color
The RDU screen color theme is customizable to match your personal preference or your vehicle’s dash illumination. Choices include
Nothing Comes Close to a Cobra® 25