Your Detector
Settings
Programming User Settings
•
IntelliMute® Mode
Set IntelliMute to mute alerts when vehicle is stopped or moving slowly. Intellimute senses engine RPMs and mutes alerts. IntelliMute does not mute strobe signals from emergency vehicles. IntelliMute works with City and Auto Mute modes.
Set an RPM activation point to start IntelliMute. IntelliMute begins muting alerts when engine RPMs fall below set RPMs. The activation point is stored in memory and recalled each time the power is turned on. IntelliMute is factory set off.
An IntelliMute icon appears in display when IntelliMute is on and activation is set. When engine RPMs fall below the activation point, Arrow points down. Arrow points up when engine RPMs are above the activation point. If unit stops sensing the engine’s RPMs, IntelliMute indicates an error and automatically turns off.
When initially choosing your IntelliMute activation point, a setting approximately 300 to 600 RPMs above idle is recommended. Reset the activation point at any time to fit individual preferences and driving style.
NOTE: Reset RPM point if detector is used in a different vehicle. IntelliMute may not work with some vehicles because it cannot sense the engine’s RPMs. Reduce unwanted audio alerts by using Auto Mute IntelliShield®
WARNING
DO NOT attempt to set the RPM point while driving. Your vehicle should be parked and idling to avoid a collision during the process.
24 English