Grundig CP-X385W user manual Turning on the Power

Page 14

TURNING ON THE POWER

Precautions

Connect all devices to be used to the projector prior to turning on the power.

8 ～ 12

WARNING When the power is ON, a strong light is emitted. Do not look into the lens.

STANDBY/ON BLANK

LASER

VIDEORGB

Control panel

1	Make sure that the power cord is firmly and
	correctly connected to the projector and outlet
	3

2	Turn on the projector's power
2	Set the power switch to [ ] (ON). The projector will go

to STANDBY mode and the POWER indicator will light to solid orange.

POWER-indikator

på/av-bryter

NOTE Turn the power on/off in right order.

•Power on the projector before the computer or video tape recorder.

•Power off the projector after the computer or video tape recorder.

3 Press the STANDBY/ON button (control panel or remote control)

•The projector begins warming up and the POWER indicator blinks green.

	STANDBY/ON
	• The POWER indicator stops blinking and
	lights to solid green once the projector's
	power is completely on.
4	Remove the lens cap
4	The picture is projected.

14

Image 14

Contents Contents Projector Features Ultra High BrightnessConnect your devices to the projector Part Names ProjectorRemote Control Setting UP the Projector Angle AdjustmentAdjusting the Screen Size and Projection Distance If 43 aspect ratioConnecting Your Devices Ports and Cables Function Projector Port Connection CablesConnecting Your Devices Connecting to a ComputerConnecting to a DVD Player Connecting to a VCRConnecting to a Display Monitor Operating the remote control Using the Remote ControlPutting batteries into the remote control unit Turning on the Power Selecting an Input Signal Turning OFF the Power Press Buttons to adjust Volume Adjusting the VolumePress the Volume button Temporarily Muting the SoundPress the Position button Adjusting the PositionUse Buttons to adjust Position Automatic Adjustment for Video Input Using the Automatic Adjustment FeatureAutomatic Adjustment for RGB Input Press the Auto buttonCorrecting Keystone Distortions Press the Keystone buttonUsing the Magnify Feature Freezing the ScreenTemporarily Blanking the Screen Signal SearchingSelecting the Aspect Ratio Select an item using Buttons, then press Or Enter button Using the Menu FunctionsSelect a menu using Buttons Then press Or Enter button Press Buttons to adjust the levelOperating the PC Screen PS/2, ADB, Serial Mouse ControlHigh Voltage High Temperature High Pressure LampLamp Replacing the lampAIR Filter Caring for the air filterReplacing the air filter Fixing the Handle HandleOther Care