Grundig CP-X385W user manual Connecting Your Devices

Page 8

CONNECTING YOUR DEVICES

Devices You Can Connect to the Projector (Refer to this section for planning your device configuration to use for your presentation.)

CAUTION • Incorrect connecting could result in fire or electrical shock. Please read this manual and the separate “SAFETY INSTRUCTIONS”.

ATTENTION Precautions to observe when connecting other devices to the projector

•Whenever attempting to connect other devices to the projector, please thoroughly read the manual of each device to be connected.

•TURN OFF ALL DEVICES prior to connecting them to the projector. Attempting to connect a live device to the projector may generate extremely loud noises or other abnormalities that may result in malfunction and/or damage to the device and/or projector. Refer to the “TECHNICAL” of the USER’S MANUAL (Vol.2) for the pin assignment of connectors and RS-232C communication data.

•Make sure that you connect devices to the correct port. Incorrect connection may result in malfunction and/or damage to the device and/or projector.

•A component cable and some other cables have to be used with core set. Use the accessory cable or a designated-type cable for the connection. For cables that have a core only at one end, connect the core to the projector.

•Secure the screws on the connectors and tighten.

Indicates the corresponding reference page

12 Display monitors

11 DVD players

11 VCRs

10 Laptop computers

10 Desktop computers

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Contents Projector Features Ultra High BrightnessConnect your devices to the projector Part Names ProjectorRemote Control Setting UP the Projector Angle AdjustmentAdjusting the Screen Size and Projection Distance If 43 aspect ratioConnecting Your Devices Ports and Cables Function Projector Port Connection CablesConnecting Your Devices Connecting to a ComputerConnecting to a DVD Player Connecting to a VCRConnecting to a Display Monitor Operating the remote control Using the Remote ControlPutting batteries into the remote control unit Turning on the Power Selecting an Input Signal Turning OFF the Power Adjusting the Volume Press the Volume buttonPress Buttons to adjust Volume Temporarily Muting the SoundPress the Position button Adjusting the PositionUse Buttons to adjust Position Using the Automatic Adjustment Feature Automatic Adjustment for RGB InputAutomatic Adjustment for Video Input Press the Auto buttonCorrecting Keystone Distortions Press the Keystone buttonUsing the Magnify Feature Freezing the ScreenTemporarily Blanking the Screen Signal SearchingSelecting the Aspect Ratio Using the Menu Functions Select a menu using Buttons Then press Or Enter buttonSelect an item using Buttons, then press Or Enter button Press Buttons to adjust the levelOperating the PC Screen PS/2, ADB, Serial Mouse ControlHigh Voltage High Temperature High Pressure LampLamp Replacing the lampAIR Filter Caring for the air filterReplacing the air filter Fixing the Handle HandleOther Care
Top Page Image Contents