Problem Check These Items | Integra DLV-100 instruction

Integra DLV-100 Problem Check These Items, Clock in the Image Options. See page 33 or

Page 46

Common Problems & Solutions

Problem	Check These Items
Does not turn on	• Check that the power cable is plugged in and that the power button on the projector cabinet or the
	remote control is on.
	• Ensure that the lamp cover is installed correctly. See page 44.
	• Check to see if the projector has overheated or the lamp usage exceeds 1100 hours (up to 1600 hours
	: Normal mode). If there is insufficient ventilation around the projector or if the room where you’re
	presenting is particularly warm, move the projector to a cooler location.

No picture	• Use the menu to select your source (Video, S-Video, RGB or PC Card Viewer). See page 31.
	• Ensure your cables are connected properly.
	• Use menus to adjust the brightness and contrast. See page 31.
	• Remove the lens cap.
	• Reset the settings or adjustments to factory preset levels using the Factory Default in the Adjustment
	Menu. See page 33.

Image isn’t square to the screen	• Reposition the projector to improve its angle to the screen. See page 23.
	• Use the Keystone in the Adjustment Menu to correct the trapezoid distortion. See page 32.

Picture is blurred	• Adjust the focus. See page 23.
	• Reposition the projector to improve its angle to the screen. See page 23.
	• Ensure that the distance between the projector and screen is within the adjustment range of the lens.
	See page 14.

Image is scrolling vertically, hori-	• Use menus or Source button on the remote control or the cabinet to select the source you want to input.
zontally or both

Remote control does not work	• Install new batteries. See page 13.
	• Make sure there are no obstacles between you and the projector.
	• Stand within 22 feet (7 m) of the projector. See page 13.

Status indicator is lit or blinking	• See the Status Light messages above.

Cross color in RGB mode	• If Auto Adjust is off, turn it on. If Auto Adjust is on, turn it off and balance the image with the Position/
	Clock in the Image Options. See page 33 or 36.

When using the PC Card Viewer function

Problem	Check These Items
No picture	•	Is “PC Card Viewer” selected from the Source menu?
	•	Is the CompactFlash memory card seated in the PC CARD slot completely?
	• Are slide data stored in the CompactFlash memory card?
	•	Have the contents of the CompactFlash memory card been destroyed?

Part of a slide is not displayed	•	While an image with over 1024768 dots is projected, several lines of information will be lost.

Contents of CompactFlash Card	•	Use a computer, etc., to repair the data.
are damaged

For more information contact your dealer.

Image 46

Contents

DLV-100 Precautions Important InformationPower Supply Important SafeguardsInstallation If you wish to have the projector installed on the ceilingLamp Replacement CleaningFire and Shock Precautions Table of Contents Introduction to the Projector DLV-100 Features you’ll enjoyIntroduction Getting StartedProjector Lens cap Whats in the Box?Batteries Attaching the lens cap Front/ Side Features ControlsGetting to Know Your Projector DLV-100 Ventilation inletAC Input Rear Foot Rear/ Side FeaturesVentilation outlet MicroSaverTop Features Terminal Panel Features Remote Control Features Supplied Remote ControlRemote Control Precautions Remote Control Battery InstallationOperating Range Throwing distance InstallationSetting up Your Projector Selecting a LocationCeiling Installation Distance ChartReflecting the Image Wiring Diagram VCR, DVD Player or LaserDisc PlayerIBM VGA or Compatibles Connecting Your PCRGB signal cable supplied Audio cableMacintosh Desktop type Connecting Your Macintosh ComputerMacintosh Notebook type To connect to a Macintosh, simplyPin-to-RCA3 cable not supplied Connecting Your DVD PlayerDVD player Audio EquipmentAudio equipment Connecting Your VCR or Laser Disc PlayerVCR/ Laser disc player Document cameraAbout Startup screen Menu Language Select screen Adjust a Projected Image Status of indicator light turn onStatus of indicator light turn off OperationAdjust the Image Size and the Focus Poor picture Normal picture Adjust the Tilt FootAdjust the Image Using Auto Adjust Up downSelecting the computer or video source Volume controlBasic Operation Optimizing RGB image automaticallyEnlarging and Moving a Picture Using Magnify buttonFreezing a picture Using the Menus Customizing Basic/Custom MenuUsing a USB Mouse Operate the Menus using the USB mouseMenu Tree Advanced MenuTab Menu ElementsTitle bar Video Menu Descriptions & FunctionsSource Select PC Card ViewerKeystone Lamp ModeImage Options Keystone distortionVideo Filter when Auto Adjust is off Position/ Clock when Auto Adjust is offResolution when Auto Adjust is off Factory DefaultProjector Options Page1 Menu ModeColor Management White Balance not available for PC Card ViewerPage2 SetupPage1 PC Card Viewer Options Signal SelectSition, Clock, Phase and Resolution You can specify interval time between 5 and 300 secondsSource Each time the projector is turned onUp. Select an input from the pull-down menu PC Card Files ToolsCapture Changing Background LogoInformation Using the PC Card Viewer function Inserting and Ejecting a CompactFlash CardProjecting slides Viewing Digital Images Capturing Images Displayed on the Projector Deleting Captured Images Type III 10.5 mm TerminologyIs a standard card-type recording medium ErsMaintenance Replacing the LampTroubleshooting Problem Check These Items Clock in the Image Options. See page 33 orElectrical SpecificationsMechanical Cabinet Dimensions Unit = mm inchPin No RGB Signal Analog YCbCr Signal Mini D-Sub 15 Pin ConnectorSub Pin Assignments Compatible Input Signal List Cable Connection PC Control Connector DIN-8PPC Control Codes Communication ProtocolIntegra Division Park Way, Upper Saddle River, N.J , U.S.A Integra Division

Integra DLV-100 Problem Check These Items, Clock in the Image Options. See page 33 or

Common Problems & Solutions

Problem

Check These Items

Clock in the Image Options. See page 33 or 36.

When using the PC Card Viewer function