Samsung HLN4365W1, HLN5065W1, HLN617W1, HLN437W1 HLN507W1 Scanning Channels Labeling the Channels

O p e r a t i o n

Scanning Channels

Labeling the Channels

You can automatically scan all of the channels in memory.

Press the MENU button.

1 Press the … or † button to select “Channel”, then press the ENTER button.

Channel

Input	Antenna	: A	√
	Air/CATV	: Air	√
Picture	Auto Program		√
	Favorite Channel		√
Sound	Channel Label		√
	Fine Tune		√
Channel	Add/Delete		√
Setup	▼ More
	Move	Enter	Return

Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”, “PBS2”, CNN1”, etc.) A label consists of five fields, where each field is a letter, a number, or a blank. When the INFO button is pressed, the channel label will appear next to the channel number.

Press the CH or CH button to

1 tune to the channel that will be labeled.

Press the … or † button to

2 select “Channel Scan”, then press the ENTER button.

The TV will change the

3 channels automatically, one by one. Scanning channels will be displayed in the PIP window. To stop channel scan, press the ENTER button again.

Channel

Input	▲ More
	Channel Scan		√
Picture	LNA	: Off	√
Sound
Channel
Setup	Move	Enter	Return

Channel Scan

Air 3

Air 4

Return

Return

Press the MENU button.

2 Press the … or † button to select “Channel”, then press the ENTER button.

Press the … or † button to

3 select “Channel Label”, then press the ENTER button.

Channel

Input	Antenna	: A	√
	Air/CATV	: Air	√
Picture	Auto Program		√
	Favorite Channel		√
Sound	Channel Label		√
	Fine Tune		√
Channel	Add/Delete		√
Setup	▼ More
	Move	Enter	Return

Channel

Input	Antenna	: A	√
	Air/CATV	: Air	√
Picture	Auto Program		√
	Favorite Channel		√
Sound	Channel Label		√
	Fine Tune		√
Channel	Add/Delete		√
Setup	▼ More
	Move	Enter	Return

NOTE

•When the ANT-B mode is selected, the channel scan function works on the main picture only.

4	Press the œ or √ button to				Channel Label
	select label field, then	Input	AIR	2	▼	Clear	Return
					A - - - -
					▲
	press the ENTER button.	Picture	AIR	3
					- - - - -	Clear
	(Each label has five fields).	Sound	AIR	4	- - - - -	Clear
			AIR	5		Clear
	Press the … or † button to				- - - - -
		Channel	AIR	6	- - - - -	Clear
	select a letter, a number or	Setup			▼
	a blank. (Pressing the … or				Move	Adjust	Return

†button results in this sequence: A~Z, 0~9, blank, -).

Press the √ button to				Channel Label
						Return
5 switch to the next field,	Input	AIR	2	CNN12	Clear
which will be selected.	Picture	AIR	3		Clear
				- - - - -
Select a second letter or	Sound
		AIR	4	- - - - -	Clear
digit pressing … or †
		AIR	5	- - - - -	Clear
button, as above. Repeat	Channel	AIR	6	- - - - -	Clear
	Setup			▼
the process to select the				Move	Adjust	Return
last two digits. Press the
EXIT button to exit the menu.

36 37