Hitachi 57F710G, 51F710G important safety instructions Setup

Setup

Manual Convergence Adjustment Mode (117 Point Manual Adjustment)

NOTE: 1. Please turn ON your television for at least 20 minutes before using this feature.

2.AUTO ADJUSTMENT MODE is recommended. If convergence is still not acceptable, use the MANUAL

ADJUSTMENT MODE.

3.If AUTO ADJUSTMENT MODE is selected or the MAGIC FOCUS button is pressed, all manual adjust mode settings will be erased.

Using the Remote Control, select SETUP, MAGIC

FOCUS TUNE UP, MANUAL ADJUSTMENT MODE, 117 POINT MANUAL, START to access convergence

117 point pattern. The adjustment point is indicated by the Adjustment Point Cursor.

To Move Adjustment Point

To move the Adjustment Point Cursor using the CURSOR buttons, the Adjustment Point Cursor must be WHITE. Another way to move the Adjustment Point Cursor is to press the following buttons: [2] up, [4] left,

[5]down, [6] right. If you use the number buttons while the adjustment point is WHITE, it will change to RED.

To Change the Color of Adjustment Point Press the SELECT button repeatedly (WHITE-RED- BLUE-WHITE...).GREEN color is fixed and cannot be adjusted.

To Adjust the Convergence

Move the Adjustment Point Cursor to the point to be adjusted. Use the CURSOR buttons to match the RED and BLUE colors to GREEN (reference color). Properly aligned, all three colors should appear white.

If convergence is acceptable after MANUAL CONVERGENCE adjustment, press EXIT button to access menu mode.

1.Use the CURSOR buttons to highlight your chosen option.

2.Press the SELECT button to select.

3.Select CANCEL to cancel adjusted data and return to main picture.

MENU	Video
	Audio

Channel Manager

Locks

Timers

Setup

Move SEL Select

Setup

Magic Focus Tune Up

Menu Preference

Set The Inputs

Set Closed Captions

Set Monitor Out

Upgrades

Quick Start Up

Move SEL Set

Setup
Magic Focus Tune Up
OR
Align the Red, Green and Blue colors
to correct for Magnetic Influences.
Adjustment Mode	: 117 Point Manual

❑At Turn Off, after 90 days.

If you want to adjust now Start

Move SEL Return

Adjustment

Point

Cursor

EXIT Setup

Magic Focus Tune Up

Manual Adjust

Please make a selection from the options below.

Cancel Done Back Reset

Move SEL Return

On-Screen Display

4.Select DONE to save your adjustments and return to main picture.

5.Select BACK to return to the manual convergence adjustment mode.

6.Select RESET to recall the factory pre-set convergence data.

51