Hitachi 53SDX20BB, 43FDX20B, 43FDX15B Vcr, Connecting a Stereo Source to INPUT1~INPUT5

CONNECTING EXTERNAL VIDEO SOURCES

CONNECTING A STEREO SOURCE TO INPUT1~INPUT5

1.Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the TV set below.

2.Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.

3.Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack.

4.Press the VID1~VID5 button to view the program from the VCR or laserdisc player. The VIDEO icon disappears automatically after approximately eight seconds.

5.Press the ANT button to return to the previous channel.

ANT A

TO

CONVERTER

			S-VIDEO S-VIDEO
		ANT B	VIDEO	VIDEO	Y/VIDEO
			(MONO)	(MONO)	PB	(MONO)
			L	L		L
					PR
AUDIO TO HI-FI			R	R		R
R	L		AUDIO	AUDIO		AUDIO
			INPUT 1	INPUT 2	INPUT 4

Back of

VL R VCR

OUTPUT

VCR

Hitachi Model or

Similar Model

		S-VIDEO
Y/VIDEO		VIDEO
PB	(MONO)	L
	L
PR
	R	R
	AUDIO	AUDIO
INPUT 5		MONITOR
		OUT

NOTES: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played back will be abnormal if the connection is loose.

2.A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output. (INPUT: 1 in example on page 12) Refer to your VCR operating guide for more information on line input- output connections.

16