Multi Picture, Split, Multi PIC | Hitachi C43-FD7000, C50-FD7000

MULTI PICTURE

The Multi Picture function on this projection TV provides two modes, Split and P in P. To use the Multi Picture function allows you to enjoy the programs easily and comfortably.

In normal picture mode, press the MULTI PIC. button to enter the Split or P in P mode.

Split

Follow the steps on page 20 to enter the Function menu, then

)XQFWLRQź

select the Multi Picture option as shown on the right.

6FDQ0RGH

3URJUHVVLYH

'HFRUDWLYH/LJKW

2II

Press the

cursor buttons to set Multi Picture option to

0XOWL3LFWXUH Ź

6SOLW

Split mode, then quit the menu.

796FDQ

In normal picture mode, press the

MULTI PIC.

button to

)UHH]H

6WLOO

enter the Split mode as shown below. The picture A and B

+36HOHFW

will show two programs of two channels respectively.

5HVHW

Once you have entered the Split mode, press the

A/B

button

6HOHFW 6HW

5HWXUQ

to select any one of the two pictures, a red

symbol

will appear on the top of the selected picture, indicating:

1 The speakers on this set output the sound from the

selected picture.

2 The monitor out terminals output audio and video signals

from the selected picture.

3 The operations such as program selection, etc. are valid

for the selected picture. However, the program No.

selected in one picture can not be the same as that in the

other one. Otherwise, the characters ! Not Available will

appear.

Notes

1 When the RECALL button is pressed, the picture A and B will display their respective program No.

instantly, and the red symbol will appear on the top of the selected picture momentarily.

2If the HP Select option in the Function menu is set to B, the headphone terminal of side panel always outputs the sound from the picture B. If the HP Select option in the Function menu is set to A/B, the headphone terminal of side panel always outputs the sound from the selected picture.

After accessing the Split mode, you can press the SWAP button to switch between the two pictures, ie, to exchange the program sources in the picture A and B.

If the Freeze option in the Function menu is set to Still, while in the normal TV mode, pressing the FREEZE button will enter the Split mode automatically. Picture A will display the current moving picture and picture B will display a still picture frozen by pressing the FREEZE button. On this point, the MONITOR OUT terminals output audio and video signals from picture A. Set the Freeze option in the Function menu to Strobe, please see page 34 in detail.

In the Split mode, the POSITION button does not work.

In the Split mode, press the MULTI PIC. or the RETURN button to exit.

In the Split mode, you may enter the Audio menu by pressing the MENU button to make adjustment. While entering other menus such as Picture, it will exit from the Split mode.