Samsung HCM 422W Customizing Your Remote Control, Remote control has four, Turn off your VCR or

Page 63

S P E C I A L F E AT U R E S

Customizing Your Remote Control

Your TV comes equipped with a “universal” remote control. In addition to controlling the TV, the universal remote can also operate most VCRs, DVDs and cable boxes (even if your VCR, cable box or DVD are made by manufacturers other than Samsung).

Setting Up Your Remote Control to Operate Your VCR (or DVD)

1

Turn off your VCR (or

DVD.)

2

Press the MODE button and make sure that the VCR (or DVD) LED is illuminated.

The remote control has four

“modes”: “TV,” “VCR”, “Cable” and “DVD.” Press the “MODE” button to switch the remote control to the “VCR” (or DVD) mode.

3

On your Samsung remote control, press Set.

4

Enter 3 digits of the VCR (or DVD) code listed on page 4.22 for your brand of VCR (or DVD).

5

Press the Power button on the remote control. Your VCR (or DVD) should turn on. If your VCR (or DVD) turns on, your remote control is now set correctly.

6

Once your remote control is set up, press the MODE button any time you want to use the remote to operate your VCR (or DVD).

Make sure you enter 3 digits of

the code, even if the first digit is a “0.”

If more than one code listed, try the first one.

If your VCR (or DVD) does

not turn on, repeat steps 2, 3, and 4, but try one of the other codes listed for the brand of your partic- ular VCR (or DVD).

If no other codes are listed, try each code, 000 through 089.

When your remote control is

in the “VCR” (or DVD) mode, the volume buttons still control your TV’s volume.

When your remote is in the “TV” mode, the VCR control buttons (PLAY, PAUSE, etc.) will still oper- ate your VCR.

CHAPTER FOUR: SPECIAL FEATURES 4.20

Image 63
Contents Owner’s Risk of Electric Shock Do not Open Thank You for Choosing Samsung Example Antenna Grounding Safety Installation Your New TVOperation Troubleshooting Special FeaturesChapter One List of FeaturesFamiliarizing Yourself with The TV Audio Input jacks Using the Component ShelfFront or Side Panel Jacks ´ Video Input jackVideo Input jacks Rear Panel JacksAntenna terminals ¨ Audio Input jacks ´ AUDIO-VIDEO Monitor Output jacksStillMain Remote ControlPower ´ +100¸ P.Mode ± Mode˘ R.surf ¿ S.ModeAntennas with 300-ohm Flat Twin Leads Connecting VHF and UHF AntennasCable without a Cable Box Connecting Cable TVAntennas with 75-ohm Round Leads Separate VHF and UHF AntennasANT IN, VHF IN, or simply, Connecting to a Cable Box that Descrambles Some ChannelsCable with a Cable box that Descrambles All Channels This terminal might be labeledInstall AT I O N Connecting a VCR Connecting a Second VCR to Record from the TV Connecting a CamcorderConnecting to Y, PB, PR Connecting a DVD Player, DTV Set-Top Box 480i, 480pConnecting a DTV Set-Top Box 480p Installing Batteries in the Remote Control Install two AAA size batteries Replace the coverMake sure to match the + Turning the TV On and Off Plug & Play FeatureYou can also use the Power button on the front panel Press the Power button1Press the Menu button CH or CH button. refer to Setting the clock onUsing the Perfect Focus Feature You can also select PerfectFocus by pressing the Perfect Focus button Adjusting Manual Convergence If a horizontal red line is visible, use Adjust Red ConvergenceViewing the Menus and On-Screen Displays Viewing the MenusViewing the Display Selecting the Antenna Input Selecting a Menu LanguageMemorizing the Channels Selecting the Video Signal-sourceStoring Channels in Memory Automatic Method TV automatically cyclesAdding and Erasing Channels Manual Method Changing Channels Using the Channel ButtonsUsing the Number Buttons Using the Previous ChannelTo View Your Favorite Channels Selecting Your Favorite ChannelsTo Store Your Favorite Channels Can be set as Favorite channelsAdding and Erasing Channels Manual Method Select Channel, then Labeling in the A/V modeLabeling the Channels Press CH or CH to tune to the channel that will be labeledGauge will automatically disappearafter about 4 seconds After adjusting an item,Picture Control Customizing the PicturePress the Menu button. Picture icon will be high- lighted Using Automatic Picture SettingsSelecting the Color Tone Adjusting the VolumeUsing Mute Sound ControlPress the Menu button exit Customizing the SoundUsing Automatic Sound Settings Sure to select the proper time of day AM or PM Setting the ClockOption 1 Setting the Clock Manually When selecting the hours, bePress the VOL + button to select Auto clock set On Press the MenuPress the CH button to select Time Zone Star icon*will appear Fine Tuning ChannelsAfter you adjust the fine tuning Press the VOL + or VOL button to adjust the fine tuningDigital Noise Reduction Press the Aspect button to change the screen Changing the Screen Size43 TV Wide TVUsing the R.surf feature Setting the On/Off Timer Before using the timer, you mustSelect Function, then If no function buttons Setting the Sleep TimerTo deactivate the On time Select Off during this stepSurround Extra sound settings Surround, Auto Volume, Melody, BBEChoosing a Multi-Channel Sound MTS Soundtrack Quick way to access the MTSSelect Caption or Text Viewing Closed CaptionsDifferent channels and fields Select Mode, then pressActivating Picture-in-Picture Quick way to access the PIPMenu Simply press the PIP button on the remote control Viewing Picture-in-PictureImage is the same as the main image Selecting a Signal Source Antenna or Cable for PIPSelecting a Signal Source External A/V for PIP Quick way to access the signalChanging the Size of the PIP Window Swapping the Contents of the PIP Image and Main ImageScanning the Available Channels Simply press the PIP CH button on the remote controlChanging the Location Rotating in PIP mode Changing the PIP ChannelMenu Simply press the V.Chip button on the remote control Using the V-ChipSetting Up Your Personal ID Number PIN Quick way to access the V-ChipHow to Set up Restrictions Using the TV guidelines How to Enable/Disable the V-ChipTV-14 TV Guidelines screen will appearGeneral audience Parent GuidanceOr CH Mpaa rating screen will appear Select Demonstration Viewing the DemonstrationPicture icon will be Highlighted blinkingMake sure you enter 3 digits Customizing Your Remote ControlSetting Up Your Remote Control to Operate Your VCR or DVD Remote control has fourSetting Up Your Remote Control to Operate Your Cable Box DVD Codes VCR CodesCable Box CodesChapter Five Identifying ProblemsCleaning and Maintaining Your TV Using Your TV in Another CountrySpecifications