Hitachi 42V525 important safety instructions Connecting a Component Source to Input 1 or 2 Y-PBPR

CONNECTING EXTERNAL VIDEO DEVICES

CONNECTING A COMPONENT SOURCE TO INPUT 1 OR 2: Y-PBPR.

1.Connect the cable from the Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (Y) jack, as shown on the TV set below.

2.Connect the cable from the CB/PB OUT or B-Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (PB) jack.

3.Connect the cable from the CR/PR OUT or R-Y OUT of the laserdisc/DVD player or HDTV set top box to the INPUT (PR) jack.

4.Connect the cable from the AUDIO OUT R of the Laserdisc/DVD player or HDTV set top box to the INPUT (AUDIO/R) jack.

5.Connect the cable from the AUDIO OUT L of the Laserdisc/DVD player or HDTV set top box to the INPUT (AUDIO/L) jack.

6.Press the the INPUTS button, then select INPUT 2 from the INPUTS menu to view the program from the Laserdisc/DVD player or HDTV set top box. The VIDEO OSD label disappears automatically after approximately four seconds.

7.Select Antenna from the INPUTS menu to return to the previous channel.

FIRST TIME USE

ANT A

TO

CONVERTER

	ANT B		INPUT 2
			Y/
MONITOR OUT	INPUT 4	INPUT 3	VIDEO
S-VIDEO
			PB
			PR
VIDEO
	(MONO)	(MONO)	(MONO)
L
AUDIO		TV AS CENTER
R
AUDIO
TO HI-FI

HDMI 1
INPUT 1
Y/
VIDEO
PB
PR
(MONO)
			RS232C
			1	2	3	4	5
				6	7	8	9
		OUTPUT
R	L	PR	PB	Y

DVD Player

NOTES: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played back will be abnormal if the connection is loose.

2. See page 13 for tips on REAR PANEL CONNECTIONS.

19