MODEL:
OPTICAL ENGINE REPLACEMENT
Optical Engine is mounted on the Adjuster assembly as shown below.
1)The Optical Engine is secured to the bottom plate with 4 screws (b).
2)The Black Bracket is secured to the bottom plate and the Lamp Cartridge Housing with 4 screws (c).
3)Tab (1) on the bottom plate slides into slot (1) on the Adjuster assembly.
4)4 screws (a) secure the bottom plate and Optical Engine to the Adjuster assembly.
5)The Optical Engine, the bottom plate, black bracket and the Optical Engine are removed as a unit.
Page 13