MODEL:
B. Selection of adjustment Functions and
Adjustment Items
To select an adjustment item in the circuit adjustment mode, first select the adjustment function that includes the specific item to be adjusted. Then select that adjustment item.
Refer to the following pages for the listing of adjustment functions and adjustment items.
1.Press the "AUDIO" button on a remote hand unit to select an adjust- ment function. Each time the button is pressed, the Function changes in the following sequence:
MAIN MATR
DDP
Adjustment Functions
FPGA
SUB MATR
MISCDEV
2.Press the “VIDEO” button to select a specific Adjustment Item. The Item number increases each time the“VIDEO” button is pressed.
C.Changing Data
After selecting an adjustment Item, use the “ADJUST UP/DOWN” buttons to change data.
•Press “ADJUST DOWN” to decrease the data value.
•Press “ADJUST UP” to increase the data value.
D. Saving Adjustment Data
Press “ENTER” to save adjustment data in memory. The character display turns red for approximately one second in this step.
Note: If the circuit adjustment mode is terminated without pressing “ENTER”, changes in adjustment data are not saved.
E. Terminating the Circuit Adjustment Mode
Press the “MENU” button on the remote hand unit twice to terminate the adjustment mode.
Note: The circuit adjustment mode can also be terminated by turning power OFF.
Page 24