Mitsubishi Electronics mitsubishi specifications Lenticular Screen and Fresnel Lens Installation

MODEL: WD-52327 / WD-62327

SERVICING THE LENTICULAR SCREEN AND FRESNEL LENS

Lenticular Screen and Fresnel Lens Installation

Note: Store the Lenticular Screen and Fresnel Lens in a cool dry place. High humidity may deform the Lenticular Screen and Fresnel Lens.

1.Apply double coated tape (Part #LENS-TAPE) along the top rear edge of the Lenticular Screen, as shown below. Refer to the table below for the tape length.

2.Sandwich the Fresnal Lens and Lenticular Screen together. The Lenticular Screen label must be towards the front and the Fresnel Lens label towards the rear. (Figure 4)

3.Apply pressure at the top edge to bond the screens together.

4.Reverse the Screen Removal procedure and insert the screens in the Screen Fame Assembly.

Figure 4: Installing the Fresnel Lens & Lenticular Screen

*X INCHES - Refer to the Tape Length in the table below

MODEL	SCREEN SIZE	TAPE LENGTH
WD-52327	52 Inches	46.3 Inches
WD-62327	62 Inches	55.1 Inches

Page 19