Mitsubishi Electronics WD-52526 manual Remote Control, Overview, Record/Playback Keys

18Chapter 1. Television Overview

Remote Control

Overview

Figure 1, next page

1.Slide Switch: Selects the A/V device to be controlled by the remote control. Set the slide switch to TV for TV operation. Control of other devices requires pro- graming (see Appendix B)

2.Numbers: Allow you to tune to a channel by entering channel numbers; press ENTER for faster tuning. Use numbers and the SUB key for digital sub-channels.

Enter information into menus.

3.SQV (SuperQuickView™): Scans through memo- rized lists of favorite channels.

4.DEVICE: Displays the Device Selection menu in which you can select the device to view (ANT 1 or devices connected to the TV’s inputs).

5.CHANNEL: Scans up or down through memorized channels. Pages up and down through screens when used with ChannelView™.

6.POWER: Turns TV power on and off.

7.GUIDE: Displays or removes ChannelView™ on- screen guide for ANT 1.

8.QV (QuickView™): Switches between the current channel and the last channel viewed.

9.SLEEP: Sets the TV to turn off within 2 hours. See the next page for instructions.

10.VIDEO: Selects individual video settings for adjust- ment.

11.VOLUME: Changes sound level.

12.AUDIO: Selects individual audio settings for adjust- ment.

13.MUTE: Turns sound off or back on.

14.ADJUST: Press to navigate menus, change settings, and move the PIP on-screen location.

15.Light: Illuminates the buttons. Located on the left side of the remote control.

Note

The remote control can be programmed to operate other audio/video devices. See Appendix B for:

•instructions on programming the remote to operate other devices.

•a list of functions available for controlling other devices.

16.ENTER/EXCH: Selects a channel number or menu item. Exchanges PIP or POP and main TV picture.

17.TV MENU: Displays the on-screen menu system.

18.V-CHIP:Turns the V-Chip Lock on or off.

19.FORMAT: Changes the shape and size of the main TV picture.

20.PIP/POP: Turns on PIP and cycles through PIP and POP display choices.

21.PIP DEVICE: Displays PIP Selection menu to select the source device for the PIP or POP image.

22.PIP CH: When the PIP source is ANT 1, scrolls up or down through analog channels memorized for ANT 1.

23.SUB/CANCEL: For digital channels, adds a separator between main and sub-channel numbers. Clears SQV and some menu entries.

24.DEVICE MENU: When programmed for the device and with the slide switch in the appropriate position, displays the menus for some VCRs, satellite receivers, and DVD players.

25.HOME: Exits TV on-screen menus and displays and returns to normal TV viewing.

26.INFO: Displays an on-screen summary of the current device in use and any broadcast information available, including current V-Chip information. See chapter 3 for details on the on-screen display.

29.PAUSE: Freezes a broadcast TV picture (when no PIP/POP image is displayed). When PIP/POP is displayed, freezes that image. See below for use with recordable media.

Record/Playback Keys

To enable the functions described here, program the remote for your VCR or DVD player and set the slide switch to VCR or DVD. See Appendix B for instructions on programming the remote.

27.REC (Record): Records with a VCR. Note that the CONNECT function is unavailable with this TV model.

28.REW/REV: Rewinds a VCR. Reverse scans a DVD.

29.PAUSE: Pauses a VCR or DVD. See above for use during TV viewing.

30.STOP: Stops play of a VCR or DVD.

31.FF/FWD: Fast forwards a VCR. Forward scans a DVD.

32.PLAY: Plays a VCR or DVD.