Mitsubishi Electronics WD-52526 Appendix C Specifications, Picture Technology, Reception, Inputs

64Appendices

Appendix C: Specifications

Picture Technology

Projection System	3 LCD, 0.7” x 3, 1280 x 720 pixels
Lamp	110 watt high-pressure mercury discharge

Reception

	Over-the-Air: VHF 2–13, UHF 14–69
Channel Frequency Reception	Analog Cable: 1–125
	Digital Cable: 1–135
	Over the Air	Analog NTSC, Digital ATSC with sub-channels (all 18 video
		formats)
Channel Type*
	Cable	Analog NTSC (non-scrambled)
		Digital QAM 64 and 256 with sub-channels (non-scrambled

*Note for Digital Channels: The channel numbers displayed on screen are determined by the broadcaster or cable company and can vary from the standard frequency number. If there is no channel-number information provided by the broadcaster or cable company, the TV creates a channel number. The created channel number uses the frequency number as the main channel number and the program number as the sub-channel number.

Inputs

Description	Qty.	Signal Type	Input Specifications
Antenna/Cable input	1	RF	F connector, 75-ohm
		HDMI EIA-861B stan-	HDMI standard connector
HDMI (digital video/audio)	2		Video: 480i, 480p, 720p, 1080i
		dard for digital audio	Audio: PCM stereo
		and video
			Not intended for use with personal computers.
			Video:	RCA Pin Plug, 1.0 V p-p, 75 ohm
Video/S-Video	3	NTSC 480i only	S-Video: Four-Pin DIN Plug
(one front, two rear)				Y: 1.0 Vp-p 75-ohm
				C: 0.286 Vp-p (burst signal), 75-ohm
		EIA-770.1 & EIA 770.2	RCA Pin Plug (EIA-770.3 Standard Levels and
			Timing)
Component Video (YPrPb)	2	480i, 480p, EIA 770.3	Y:	1.0 Vp-p (includes synch), 75-ohm
		720p and 1080i (video
			Pr:	700 mV p-p, 75-ohm
		standards)	Pb:	700 mV p-p, 75-ohm
Audio Inputs	7 pairs	Analog left and right	RCA Pin Plug 500 mV (full scale), 43-k ohm
		audio