Mitsubishi Electronics HC3000/HC910 specifications Superb contrast to, Mounted with 2-3 pull-down

New Color Wheel

All-Glass Lens

■Superb contrast to 4000:1

Equipped with an optical engine mounted with high-detail all-glass lens, forging dramatic

improvements in contrast. Motor-driven iris function lens aperture further enhances the package, elevating contrast to the stellar level of 4000:1.

■Further evolving the motor-driven iris lens with 2-level switching

Motor-driven variable lens aperture equipped, for optical contrast adjustments that ensure optimal incident light supply to the DMD chip. Two-level remote control switching further streamlines use of selected brightness levels.

■New color wheel with true color reproduction and handsome brightness

White has been added to the conventional color wheel (made up of six color parts), boosting brightness to an outstanding 1000lm. A special

coating is also used to raise the reproduction of reds - a vital color group for the sake of image reproduction.

■Top picture quality even in brightly light living rooms, producing high luminance of 1000lm

Note:Photo shows the HC3000.

■Illuminated remote control, easy to use in darker rooms too

The system includes an illuminated remote control panel, with the buttons lighting up for easy use even in darkened rooms. Picture quality is also corrected also by remote, enabling direct operation.

Note: Photo shows the

HC3000 remote control.

2000:1 4000:1

■Dark chip 2-DMD, for high resolution of 1024×576

This projector features a DMD chip (wide panel) with stellar 1024×576 dot resolution. Mirror inclination angle of ±12 degrees effectively cuts black diffused light. Besides this, the rear structure of the mirror uses dark metal to block diffused reflection and stray light, setting the scene for fine and rich gradation.

< Digital Micro-Mirror Device >

Fully open iris(2700:1) Stopped down iris(4000:1)

■Mounted with 2-3 pull-down,

for classy reproduction of movie software

Movie film and other media recorded at 24 frames per second are converted to 30-frame/sec. images, the same as TV broadcasts. The bottom line is projection of high-detail images closing in on the fine texture portrayed with film.

24-frame/sec. movie film signal

Conversion to 30-frame/sec.

with 2-3 pull-down 1 frame 1 frame 1 frame 1 frame 1 frame

This projector produces outstanding brightness of 1000lm. Even in living rooms or other brightly lit spaces, comparatively flat video software or sporting events can also be savored through top-quality images.

■Trapezoidal distortion correction

The digital trapezoidal distortion correction function enables correction of picture distortion at ±20 steps.

■25dBA low noise performance

Hushed low noise level of 25dBA realized with use of a low-noise fan, color wheel holder configuration and lamp fin dimensions.

■Center lens and front exhaust, for trouble-free installation and viewing

Adopted for redoubled ease in focusing the projected image at the center of the screen is a center design that positions the lens at the center of the unit. And with hot air released from the front-mounted exhaust port, there is no difficulty in viewing from the side or behind the projector.

< DMD Pixel Composition Map >

Mirror

Torsion hinge

Yoke

Landing chip

■Equipped with high picture quality reproduction circuit 3D Y/C separation, 10-bit color decoder

Image color and brightness signals are separated with superb accuracy, using 3D processing. Cross color (rainbow pattern noise) and dot interference (dotted noise) are effectively curbed, while further use of the 10- bit processing color decoder reproduces images with

even greater clarity. Without 10-bit 3D Y/C separation With 10-bit 3D Y/C separation