One for All URC 6800 manual Features and Functions, Feature Function

Page 3

FEATURES AND FUNCTIONS

The illustration below and the chart on the next three pages describe the features and functions of the Cinema 6+ univer- sal remote control. Use the drawing to locate each feature of the remote, then refer to the chart for a description of what function each feature performs.

FEATURE - FUNCTION

The Light (LED) flashes red to show

that the remote is working and is sending a signal.

The SETUP key is used to program your

Cinema 6+.

The POWER key controls power ON and OFF the same as the POWER key on your original remote. Please note that most CD Players do not have an ON/OFF function on the original remote control. If this is the case with your CD Player, then POWER will have no effect on your CD Player.

The TV, VCR, DVD/LD, RCVR, CD and CBL/SAT keys are used to select the home entertainment component you want to control. If your component does not respond when you press a key on the remote control, press the appropriate device key (TV, VCR, DVD/LD, RCVR, CD or CBL/ SAT) first to tell the remote control which component you would like the remote to operate.

The VOL ▲ (Volume Up), VOL ▲(Volume Down) and MUTE keys control the volume the same as the Volume Up and Down and Mute keys on your original remote.

The CH ▲ (Channel Up) and CH ▲(Channel Down) keys change channels the same as the Channel Up and Down keys on your original remote. The

CH▲ / ▲ keys also control the following functions in other modes: DVD/LD mode = Skip Forward/ Skip Reverse, RCVR and CD mode = Preset Up/Preset Down.

The Digit keys (0-9) control direct channel access the same as the Digit keys on your original remote. The Digit keys (0-9) may also control the following functions in other modes: RCVR mode = Input Selections.

The ENTER key operates the same as the Enter key on your original remote. If your original remote con- trol required you to use an Enter key to change channels, use the ENTER key on the Cinema 6+ after entering your channel number. The ENTER key may also control the following functions in other mode: RCVR mode = TAPE MON.

The PREV CH (Previous Channel) key operates the same as the Last Channel or Recall key on your original remote. The PREV CH key may also control the following functions in other modes: DVD/LD, RCVR and CD mode = Random.

Web Site : http://www.oneforall.com

Web Site : http://www.oneforall.com

4

5

Page 2 Page 4
Image 3
Page 2 Page 4
Contents URC Cinema 6+ Manual Overview ContentsFeature Function Features and FunctionsPage Setup Codes For TVs Installing the BatteriesProgramming the Cinema 6+ to operate your VCR Setup Codes For VCRsProgramming the Cinema 6+ to operate your TV/VCR Combo Setup Codes For TV/VCR Combos Setup Codes for DVD PlayersSetup Codes for Laser Disc Players ADC Setup Codes For Receivers/TunersProgramming the Cinema 6+ to operate your Receiver/Tuner Programming the Cinema 6+ to operate your CD PlayerSetup Codes for Cable Converters Setup Codes For CD PlayersRetrieving the Codes Programmed Into Setup Codes for SatellitesSetup Searching for Your CodeSetting UP Other Components Learning Functions Onto the 1L, 2L, 3L and 4L KeysDeleting Functions from the L Keys RE-ASSIGNING Device Keys Programming the Macro Keys Volume LockUsing the Sleep KEY Trouble ShootingProblem Solution Consumer Help Line Mail Address help@hudsonag.com Limited WarrantyURC-6800- Cinema 6+
Top Page Image Contents