One for All URC 6800 manual Programming the Cinema 6+ to operate your Receiver/Tuner, Adc, Mcs

Pioneer	0059
Sony	0193, 0201

Programming the Cinema 6+ to operate your Receiver/Tuner:

Locate the brand name of your Receiver/Tuner in the “Setup Codes For Receiver/Tuners” section (starting below page), and write it in below.

Receiver/Tuner Brand: ______________________

The brands are listed in alphabetical order with the most popular codes listed first. You will use one of these codes to program your Cinema 6+ to operate your Receiver/Tuner as follows:

1. Turn on your Receiver/Tuner.

2.Press RCVR and release. Press and hold SETUP until the Cinema 6+’s red light blinks twice, then release SETUP.

3.Enter the first four-digit Receiver/Tuner code listed for your brand in the “Setup Codes For Receivers/Tuners” section. If performed correctly, the red light will blink twice when you enter the final digit.

4.Aim the Cinema 6+ at your Receiver/Tuner and press POWER. The unit should turn off. If it does not respond, repeat steps 2-4, trying each code listed for your brand until you find one that works.

NOTE: If the unit still does not respond, try using the search method on page 21.

5.Your Cinema 6+ is now programmed to operate your Receiver/Tuner. Write your

Receiver/Tuner code in the boxes to the left for future reference.

Remember, to use your Cinema 6+ to operate your Receiver/Tuner, press the RCVR key first.

Setup Codes For Receivers/Tuners

ADC	0531
Akai	0076
Aiwa	0121, 0158, 0189, 0405
Bang & Olufsen	0898
Capetronic	0531
Carver	0008, 0042, 0189, 0360
Casio	0195
Clarinette	0195
Curtis Mathes	0039, 0080
Denon	0004
Fisher	0042, 0360
Garrard	0463
Harman/Kardon	0110, 0891, 0189
JBL	0110
JVC	0074
Kenwood	0027, 0313, 0314, 0186, 0042
Linn	0189
Lloyd’s	0195
LXI	0181
Magnavox	0189, 0195, 0531, 0391
Marantz	0039, 0189
MCS	0039
Modulaire	0195
NAD	0320
Nakamichi	0097

Web Site : http://www.oneforall.com

Onkyo	0135, 0380
Optimus	0042, 0080, 0181, 0186, 0531, 0670, 0738, 0801
Panasonic	0039, 0309, 0518
Setup Codes For Receivers/Tuners (continued)
Penney	0195
Philips	0189
Pioneer	0014, 0080, 0150, 0531, 0630, 1023
Quasar	0039
RCA	0054, 0360, 0531, 0530
Realistic	0181, 0195
Sansui	0189
Scott	0322
Sharp	0186
Sherwood	0491, 0502
Sony	0158**, 0474
Soundesign	0670
TEAC	0463
Technics	0039, 0309, 0518
Victor	0074
Wards	0014, 0042, 0054, 0080, 0158, 0189
Yamaha	0176, 0186
Yorx	0195
Zenith	0857

**May use Misc. Audio code 0159 to operate surround and tuner presets. See page 23 for misc. audio setup and codes.

Programming the Cinema 6+ to operate your CD Player:

Locate the brand name of your CD Player in the “Setup Codes For CD Players” section (starting on the next page), and write it in the space below.

CD Player Brand: __________________________

The brands are listed in alphabetical order with the most popular codes listed first. You will use one of these codes to program your Cinema 6+ to operate your CD Player as fol- lows:

1. Turn on your CD Player and insert a disc.

2.Press CD and release. Press and hold SETUP until the Cinema 6+’s red light blinks twice, then release

SETUP.

3.Enter the first four-digit CD Player code listed for your brand. If performed correctly, the red light will blink twice when you enter the final digit of your code.

4.Aim the Cinema 6+ at your CD Player and press PL (Play). Your CD Player should play your disc. If it does not respond, repeat steps 2-4, trying each code listed for your brand until you find the one that operates your CD Player.

NOTE: If you have tried all the codes listed for your brand and your CD Player does not respond, try using the search method found on page 21.

5.Your Cinema 6+ is now programmed to operate your

CD Player. Write your CD Player code in the boxes to the left for future reference.

Web Site : http://www.oneforall.com

16 17