RCA scenium manual 2A 2B, How to Connect TV + VCR + DVD Player, Go to page, Viewing the Components

Connections & Setup

TV

R	AUDIO	L	VIDEO				DVD
IN
R		L	VIDEO	PR	PB	Y	S-VIDEO
OUT
				L/	L/		L/

2A 2B

DVD

VCR

TV

FIXED/VARIABLE AUDIO OUTPUTS
CENTER SPEAKER INPUT CENTER R REAR	L REAR
EXTERNAL AMP		MATRIX
		SURROUND
MAX POWER RATING!
(60 WATTS into 8 OHMS)		OUTPUTS
				AUDIO/VIDEO
				OUTPUT
SUBWOOFER R	L	WIRED	R	L	V
		IR
POWER
(AC 120V~60Hz)
DIGITAL
AUDIO		CableCARD™
ETHERNET OUTPUT

	COMPOSITE INPUTS					COMPONENT/COMPOSITE INPUTS
						Use menu for composite video.
	INPUT 3						INPUT 4		L/
R	L	V	S-VIDEO		R	L	PR	PB	Y/VIDEO
R	L	V	S-VIDEO		R	L	PR	PB	Y/VIDEO
		INPUT 1					INPUT 2
		CABLE		For Factory Use Only			ANTENNA INPUT
		INPUT

HDMI/DVI INPUT

Use menu for DVI audio.

OFF-AIR ANTENNA

3B			3A
VCR			1
ANTENNA IN
R AUDIO L	VIDEO	R AUDIO L VIDEO
IN		OUT
ANTENNA OUT

How to Connect: TV + VCR + DVD Player

CABLE

1.Connect your cable and/or off-air antenna.

If you have cable and an off-air antenna, connect the cable signal to CABLE INPUT. Connect the off-air antenna to

ANTENNA INPUT.

2.Connect your DVD Player to your TV.

A.Connect the audio (white and red) cables to the INPUT 4 R and L Audio jacks on the back of the TV and to the Audio Output jacks on the DVD player.

B.Connect three video grade cables to the INPUT 4 Y/VIDEO PB PR jacks on the back of the TV and to the Y PB PR

outputs on the DVD player. If your DVD player doesn’t have Y PB PR, but has composite video and an S-Video output, use the INPUT 3 S-VIDEO jack instead of the V (Video) jack for better picture quality.

Notes: If you are using an S-Video cable or component video cables, you must also connect audio cables. The S-Video cable and component video cables only transfer video information.

If your DVD player has a component video output, we recommend you use the component video input on the TV instead of the composite video or S-Video connection.

3.Connect your VCR to your TV.

A.Connect the VCR’s audio/video outputs to INPUT 1 (R and L-Audio, and V-Video) on the TV using composite audio/video cables.

B.Connect the VCR’s audio/video inputs to AUDIO/VIDEO OUTPUT jacks on the TV. This enables recording of digital and analog programs (except copy protected or component video formats).

Viewing the Components

1.Turn on the TV and the component(s) you want to view.

2.Press the TV button on the remote control.

3.Press the INPUT button on the remote control to scroll through the Video Input Channels.

•View the VCR on the INPUT 1 channel.

•View the DVD player on the INPUT 4 channel.

Note: You can set up the TV to automatically tune to the correct Video Input Channel. This is called Auto Tuning. (See Chapter 3 for more information.)

Go to page 23

Chapter 1 15