One for All OARI06G warranty One For All SmartControl Audio/Video Help Keys

One For All SmartControl Audio/Video Help Keys

One For All SmartControl also makes it easy to adjust your home theater devices so that you’re watching and listening to the right signal. The HELP keys directly below the activity keys automatically switch the inputs on the devices you use to watch and listen to movies, TV, or music.

3OOFOR EXAMPLE IFXYOUMHAVE A $6$ PLAYING THAT YOUAWANT TOA watch, but you don’t see the picture on your TV, the One For !LLL3MART#ONTROL !UDIO6IDEO (ELP KEYS MAKE IT EASYSTO lX

4OOUSEUTHEEAUDIOVIDEOAHELP KEYS

1.Make sure you’re in the right One For All SmartControl mode—press the One For All SmartControl key corresponding to the activity you’re using (watch TV, watch movie, or listen to music).

2.Press the help key for the signal you’re missing.

)F YOUREENOTNHEARING THEHRIGHTRAUDIO press the AUDIO help key. If you still don’t hear the audio you want, press the AUDIO help key again. You might need to press this key several times to find the right signal.

)F YOUREENOTNSEEING THEHRIGHTRVIDEO press the VIDEO help key. If you still don’t see the video you want, press the VIDEO help key again. You might need to press this key several times to find the right signal.

If the Audio/Video Help keys aren’t working...

You might need to customize them for your devices. Different home entertainment devices handle inputs in different ways, and not every device will respond to the default commands the SmartRemote sends to switch inputs.

4OOCUSTO IZETTHEMHELP KEYSTFOREYOUR DEVICES

1.Press and hold the SETUP key until the blue ring flashes twice.

2.Press the key for the activity you’re having problems

WITHT&OREXAMPLE IFEAXHELP KEY DOESNTTWORK WHENK

you’re watching TV, press the key.

3.Press the help key that’s not working (AUDIO or VIDEO). The blue ring flashes twice to confirm you’ve customized it for your device.

If the help keys don’t work when you’ve customized them for your devices, and you’d like to change the audio/ video help keys back to their regular input commands, just perform the steps 1–3 again. The help keys go back to their default commands.

Note: If the help keys are going to the wrong A/V input(s) (or if they’re doing something other than changing inputs) you may be using the wrong code. Repeat the One For All SimpleSet procedure or try the next code within the Direct Code Set Up procedure.

English

13