One for All OARI06G Earning, Before You Start, 4OOLEARNNFUNCTIONS Tfro Youryoriginal RE OTES 

,EARNING

Learning lets you copy one or more functions from your

ORIGINAL REMOTELCONTROLMTO THIS REMOTET&OROEXAMPLE IFTYOUR audio receiver remote has a key that this remote doesn’t have, you can copy (or learn) that key from the original remote to this one.

Before You Start

ss9OURUORIGINAL REMOTENCONTROLS MUSTOBE IN WORKINGTORDERL for learning to work properly.

ss,EARNEDRKEYS ARE MODEYSPECIlC SO EACH KEY CAN STORE A unique function for each mode.

ss,EARNEDRKEYS CAN BEEUSED INCMACROS SEE h5SING

Macros”).

ss$O NOT USE THE FOLLOWING KEYS FOROLEARNINGISETUP or 2ECORD s +EY

ss,EARNING CAPACITY IS APPROXIMATELY  KEYS DEPENDING on the individual functions being learned.

ss.OTOALL KEYS CAN BEELEARNED 3OME REMOTESLHAVE KEYSE that use commands that are incompatible with this remote.

ss&OROOPTIMUMPLEARNINGMAVOIDEHIGH LEVELSGOF AMBIENT LIGHT such as natural sunlight or energy-efficient fluorescent lights.

NOTE: Please have your original remote controls handy before programming learning. Be sure to press each teaching key within 5 seconds of the previous entry. Otherwise, this remote exits the learning mode.

4OOLEARNNFUNCTIONS TFRO YOURYORIGINAL RE OTES 

1.Press and hold the SETUP key until the blue ring flashes twice.

2.Press 9 7 5. The blue ring flashes twice.

3.Use the device select keys to highlight the kind of device

YOUOWANT TOAUSETWITH THE LEARNED FUNCTION &OR EXAMPLEA if you want learn a function to use with your audio receiver, select AUDIO.

4.Place both remote controls on a flat surface. Make sure that the ends you normally point at your device are facing each other. The remotes should be 1–2 inches from each other.

1–2

inches

5.Press the key on the One For All SmartControl remote you want to use for the learned function. The indicator for the device you chose in step 3 flashes rapidly.

&OROEXAMPLE IFMYOULWANT TOIUSE THEORED KEYAFORTTHETNEW function, press the red key.

6.Press the key on the original remote you want to learn. The blue ring on the One For All SmartControl remote flashes twice to confirm that you’ve learned the function.

To copy other functions within the same mode, repeat steps 5 and 6, using a different key on the One For All SmartControl remote.

16