One for All URC-2585 manual Trouble-Shooting, Searching for Your Code

Trouble-Shooting

Searching for Your Code

If your Television, Video Recorder or Satellite Receiver does not respond to the BIG EASY after you have tried all the codes listed for your brand, try the Search Method. The Search Method may also work if your brand is not listed at all.

Let's say you cannot get your BIG EASY to control your Television:

1

2

3

Switch your Television on.

TV	Press the TV key on your BIG EASY.
MAGIC	Aim the BIG EASY at your Television.
	Press and hold MAGIC until the BIG
	EASY’s red light blinks twice. Then, press
	9 9 1. The red light will blink twice.

4	TV	Now, alternate between TV and POWER,
		over and over, until your Television turns
		off. You may have to press these keys
		many times, so please be patient.
		Remember to keep pointing the BIG
		EASY at your Television when you press
		the TV and POWER keys.
5	MAGIC	When your Television turns off,
		press MAGIC. Don't forget, press MAGIC

as soon as your Television turns off. Now your BIG EASY is ready to run your Television.

To search for the code for your Video Recorder, Satellite or Cable Box, follow the instructions above, only press the VCR or SAT key during steps 2 and 4.

Note: If your Video's original remote control does not have a power key, press PLAY instead of POWER when searching for your code.

14