One for All URC-2585 manual Setting Up The BIG Easy, Setting Up Your Device

Setting Up The BIG EASY

Setting Up Your Device

To set up the Big Easy for your television:

1

	FOR	ALL
ONE

003180,016,047,093

179,

A-Mark	180	161		052,		003,136
Admiral	055,	030,
Anam National	019,
Anam	003						056
AOC	016 046,186,
ArcherHowell	030,				000,046
&	000
All			000,
	000,

Find your Television code in the Set-Up Code section (starting on page 19). Codes are listed by brand name. The most popular code is listed first. Make sure your Television is switched on.

2

3

4

TV

MAGIC

Press and release your BIG EASY’s TV key, then press and hold the MAGIC key until the red light blinks twice (the light will blink once then twice).

Enter your three-digit TV code using the number keys. The red light will blink twice.

Now, aim your BIG EASY at your Television and press POWER.

If your Television switches off, your BIG EASY is ready to run your Television.

Write your code in the three boxes on page 18, for quick, easy reference.

To control your Television, press TV first.

Important notes:

-To set up your Video Recorder or Satellite, follow the same instructions above, only press the VCR or SAT key during step 2.

-To set up your Cable Box, follow the instructions above only press the SAT key during step 2.

-If your Video’s original remote control does not have a power key, press PLAY instead of POWER when searching for your code.

-If your Device does not respond, follow steps 1 - 4 with each code listed for your brand. If none of the codes listed for your brand operate your Device, then try the search method described on page 14, even if your brand is not listed at all.

5