Using the Setup Menu

You can access the Setup menu whether you are in Record or Playback mode.

The Setup menu allows to configure general camera settings.

To go to Setup Menu:

1.Press Menu button to launch the Record/Playback Menu.

2.Use the or keys to switch the menu tab to Setup menu.

3.Use the or keys to move through the menu selections.

4.To select an item, press the OK button or key.

5.Change the submenu settings using the 4-way navigation control.

6.Press the OK button to save and apply settings.

Setting Sounds

Use the Sound menu functions to control the sounds produced by the camera.

1.From the Setup menu, select Sounds.

2.Adjusts sound settings.

3.Press the OK button to apply changes.

Item

Available Settings

Description

 

 

 

Startup

Sound 1, Sound 2, Sound 3, Off

Selects the startup sound when camera is turned on.

 

 

 

 

 

Enables or disables shutter sound when Shutter button is pressed.

Shutter

On, Off

Shutter sound is not available when recording movies or voice

 

 

clips.

 

 

 

Beep

0-4

Adjusts volume.

Volume

 

 

 

 

 

Setting Power Save

The Power Save function allows you to set an idle time after which the camera automatically sets to sleep mode to save power. After a minute of being in sleep mode, the camera eventually turns off power.

This function is not available in the following instances:

Recording a movie or audio file

Playing a slideshow/video/audio file

Using the USB connector

62

Page 66
Image 66
HP SW450 manual Using the Setup Menu, Setting Sounds, Setting Power Save, To go to Setup Menu