113, Before Auto Setup, During Auto Setup | Yamaha HTR-5990 specification

TROUBLESHOOTING

■AUTO SETUP

Before AUTO SETUP

	Error message	Cause	Remedy	See
	Error message	Cause	Remedy	page
				page

	Connect MIC!	Optimizer microphone is not connected.	Connect the supplied optimizer microphone to the	30
	Connect MIC!	Optimizer microphone is not connected.	OPTIMIZER MIC jack on the front panel.	30
			OPTIMIZER MIC jack on the front panel.

	Unplug HP!	Headphones are connected.	Unplug the headphones.	—

During AUTO SETUP

	Error message	Cause	Remedy	See
	Error message	Cause	Remedy	page
				page

	E-1:NO FRONT SP	Front L/R channel signal(s) is (are) not	Select the front speakers with SPEAKER A or B.	—
		Front L/R channel signal(s) is (are) not
		detected.	Check the front L/R speaker connections.	13
		detected.


	E-2:NO SURR.SP	A surround channel signal is not detected.	Check the surround speaker connections.	13

	E-3:NO PRNS SP	A presence channel signal is not detected.	Check the presence speaker connections.	13

		Only right surround back channel signal is	Connect the surround back speaker to the LEFT
	E-4:SBR->SBL	Only right surround back channel signal is	SURROUND BACK SPEAKERS terminal if you	13
	E-4:SBR->SBL	detected.	SURROUND BACK SPEAKERS terminal if you	13
		detected.	only have one surround back speaker.
			only have one surround back speaker.

			Try running AUTO SETUP in a quiet environment.	—
	E-5:NOISY	Background noise is too loud.
	E-5:NOISY	Background noise is too loud.	Turn off noisy electric equipment like air conditioners	—
			Turn off noisy electric equipment like air conditioners
			or move them away from the optimizer microphone.
			or move them away from the optimizer microphone.

		Surround back speaker(s) is (are)	Connect surround speakers when you use (a)
	E-6:CHECK SUR.	connected, though surround L/R speakers	Connect surround speakers when you use (a)	13
	E-6:CHECK SUR.	connected, though surround L/R speakers	surround back speaker(s).	13
		are not.	surround back speaker(s).
		are not.

	E-7:NO MIC	The optimizer microphone was unplugged	Connect the supplied optimizer microphone to	30
	E-7:NO MIC	during the AUTO SETUP procedure.	OPTIMIZER MIC jack on the front panel.	30
		during the AUTO SETUP procedure.	OPTIMIZER MIC jack on the front panel.

	E-8:NO SIGNAL	The optimizer microphone does not detect	Check the microphone setting.	30
		The optimizer microphone does not detect
		test tones.	Check the speaker connections and placement.	13
		test tones.


	E-9:USER CANCEL	The AUTO SETUP procedure was	Run AUTO SETUP again.	30
	E-9:USER CANCEL	cancelled due to user activity.	Run AUTO SETUP again.	30
		cancelled due to user activity.

	E-10:INTERNAL	An internal error occurred.	Run AUTO SETUP again.	30
	ERROR	An internal error occurred.	Run AUTO SETUP again.	30
	ERROR

INFORMATION	ADDITIONAL

113

Image 117

Yamaha HTR-5990 owner manual 113, Before Auto Setup, During Auto Setup, Connect MIC, Unplug HP

Contents

HTR-5990 Important Safety Instructions Example of Antenna Grounding FCC Information for US customers For Canadian Customers IiiPour LES Consommateurs Canadiens Serial No Contents Features Supplied accessories Getting StartedPlease check that you received all of the following parts Installing batteries Using the remote control Preparing the remote controlRemote control transmits a directional infrared ray Be sure to aim the remote control directly at the remote Front panel Controls and Functions Volume Tuning Mode AUTO/MAN’L, DisplayFM/AM Memory MAN’L/AUTO FM LEVEL, Band Remote controlReturn Macro ON/OFF Volume + PowerStandby Audio SEL Front panel display LFE indicator 96/24 indicatorPresence and surround back speaker indicators Night indicator Rear panel Wrench HolderAC Outlets Connections Before connecting speakers Connecting speakers Connecting to the speaker terminalsDi-pole speaker layout 10 mm 3/8 Speaker terminal wrench Red positive + Black negativeRed positive + Black negative Speaker layout Connecting the banana plugPRESENCE/ZONE 23 terminals Connect presence speakers to these terminals Right Left Surround speakers Surround back speakers Bi-wire connection Using bi-wire and bi-AMP connectionsConventional connection Bi-AMP connection Cable indications Analog jacksDigital jacks Audio jacks Audio signal flow for OUT RECAudio jacks Digital Audio Optical jacks Digital Audio Coaxial jacks Video jacks Video signal flow for Monitor OUTVideo jacks Component Video jacks Connecting Hdmi components Hdmi out DVD Player Cable TV orHdmi Video Monitor Connecting video components Connecting a DVD playerVideo Monitor Connecting other video components Satellite tunerDVD recorder Or VCR Connecting to the Video AUX jacks on the front panel Connecting to the Multi CH Input jacks CD recorder Connecting audio componentsMD recorder or tape deck CD player Connecting an external amplifier Connecting the AM loop antenna Connecting the antennasGround GND terminal Indoor FM antenna included Connecting the AC power cable Connecting the power cableTurning on and off this unit Memory back-up Select 6 ohms if you are using 6 ohm speakers Setting the speaker impedanceThis unit will be set to the standby mode This unit, Zone 2 and Zone 3 are turned off Auto Setup Optimizer microphone setupIntroduction Press n to select Setup and then press l / h to select Using Auto SetupSET Menu Auto Automenu ResultexitIf you selected Auto in step Resultexit display appears If you selected Reload in stepPress Enter to return to the Resultexit screen Press Enter to confirm your selection Basic operations PlaybackPress Speakers a or B on the front panel Or press Speakers a or B on the remote Front panel Remote control Name of the sound field category Dial NormProgram name Using Silent Cinema Adjusting the tonal qualityPress Mute on the remote control Additional operations Selecting the Multi CH Input To play back Dolby Digital or DTS signals in 5.1 channelsEnjoying multi-channel software 7.1 channel surround Auto Press Select on the remote control to select a decoder Enjoying 2-channel software in surroundDecoder types for the Surround program Using the night listening modes Using Pure DirectChoices MIN, MID, MAX Lights up Listening to unprocessed input signals Using the sleep timerDownmixing to 2 channels Straight Virtual Cinema DSP Playing video sources BackgroundSelecting audio input modes Displaying information about the input Source Audio informationVideo information Recording Turn on the power of this unit and all connected componentsSee page 28 for details Front panel or Automatic tuning FM/AM TuningPress PRESET/TUNING/CH l / h once to begin automatic tuning 4 1 Manual tuning Automatic preset tuning Customized automatic preset tuning See page 44 for tuning instructions Manual preset tuningMemory indicator flashes for about 5 seconds 2,5 Repeat steps 1 to 5 to store other stations Selecting preset stations Press and hold PRESET/TUNING Edit for more than 3 seconds Exchanging preset stationsPress PRESET/TUNING Edit again 1,3 1,3 What is XM Satellite Radio? XM Satellite Radio TuningXM Satellite Radio connections Information from XM Satellite Radio Inc XM Satellite Radio controls and functions Front panel functions Remote control functions PRESET/CH k / n on the remote control to Press PRESET/TUNING/CH l / h orActivating XM Satellite Radio Select channel Selecting the XM Satellite Radio mode Using XM Satellite Radio search modesAll Channel Search mode CAT Search Category Search mode Preset Search mode Direct Number Access modePreset Search Setting XM Satellite Radio preset channels When the channel number 040 is selectedDisplay changes as follows Preset number Preset groupGroup letter appears Colon appears Displaying the XM Satellite Radio information in the OSD Displaying the XM Satellite Radio information Changing parameter settings What is a sound field?Editing Sound Field Parameters Elements of a sound field Resetting parameters to the factory values For movie/video sources Sound Field Program DescriptionsSource Control Program THX 7ch Stereo For music sources Sound Field Parameter Descriptions INIT. DLY / P. INIT. DLY Initial delayDSP Level DSP level Room Size / P. Room Size Room size SB. INIT. DLY Surround back initial delay INIT. DLY Surround initial delayLiveness Liveness Room Size Surround room size REV. Delay Reverberation delay REV. Time Reverberation timeREV. Level Reverberation level For 7ch Stereo Dialog Lift Dialog liftFor PL x Music For Neo6 Music For THX Cinema Decode Type Decoder type For Movie TheaterFor Surround Standard For Surround Enhanced Sound Field Program Speaker Layouts Channel audio 6.1-channelStereo Audio Monaural Stereo Audio *1 Audio *2 Audio *3 Standard Straight Use to manually adjust basic system parameters Manual Setup Option Menu Use to manually adjust the optional system settings Use the remote control to access and adjust each parameter Using Manual Setup LFE/BASS OUT Using Basic MenuFront SP Center SP SB L/R SP Subwoofer PhasePresence SP Cross Over CSP Distance BSP LevelSpeaker level BSP Level Speaker distance CSP Distance Dthx SET Using Sound MenuEtest Tone Aequalizer Daudio SET Blfe LevelEhdmi SET Cdynamic Range Using Input Menu Cvolume Trim Ddecoder ModeMulti CH Setup Emulti CH SET Binput Rename Adisplay SET Using Option Menu Bmemory Guard Caudio SelectHdmi interlace/progressive up-conversion EPARAM. INI Fzone SETParameter initialization EPARAM. INI XM Satellite Radio set GXM Radio SET GXM Radio SETZone 3 amplifier ZONE3 AMP Display Display Advanced Operations Selecting the OSD mode Adjusting speaker levels Using Advanced Setup Advanced SetupUser preset Preset Name of the selected parameter Current setting Remote control AMP ID Remote AMP Wake on RS-232C access Wake on 232CRemote control tuner ID Remote TUN Remote control XM ID Remote XM Control area Remote Control FeaturesControlling this unit Controlling other components VOL Controlling each component Remote Control Code Default Settings Setting remote control codesSet AMP/SOURCE/TV to Source Input area Component Code Category Setting remote control tuner codes Setting remote control AMP codesSetting remote control XM codes Press Enter Press Learn again to exit from the setup mode Using LearnPress an input selector button to select a source component A. model To 10 cm 2 to 4 Press Learn using a ballpoint pen or similar object Press Learn again to exit the learning modeLearn appears in the display window Using RE-NAME Using Macro Press a macro buttonMacro buttons First Second Third Macro operations Press Macro using a ballpoint pen or similar objectProgramming Macro operations Set Macro ON/OFF to on Press a macro button Press Clear by using a ballpoint pen or similar object Using ClearPress k / n to select the clear mode Basic Clear operations 100 Remote control returns to the learning modeClearing a learned function Press Learn again to exit Remote control returns to the macro programming mode Press Clear to exit the clearing mode101 Clearing a macro function Using the external amplifiers Connecting the Zone 2 and Zone 3 componentsZone 2/ZONE 102 Selecting Zone 2 or Zone Using the internal amplifiers of this unit103 Front panel operations Set AMP/SOURCE/TV on the remote control to AMP Remote control operationsControlling Zone 2 and Zone 104 Adjusting the volume level of Zone 2 or Using the control mode of Zone 2 and ZoneAdjusting the tonal quality of Zone 2 or 105 Hdmi What is HDMI?106 Hdmi compatibility with this unit Setting the Hdmi parameters Basic Hdmi operations107 Troubleshooting 108General 109 110 111 TunerXM Satellite Radio 112 Remote control During Auto Setup Before Auto Setup113 Connect MIC After Auto Setup 1142OVER 24m 80ft Glossary Audio information115 Neo6 116PCM Linear PCM Sampling frequency and number Quantized bits Video information Sound field program information117 Frequency 118Gain Factor 119 Specifications CD Recorder CableDVD Player DVD Recorder Satellite Tuner Tape Deck Contec VCR WF99950