PLAYBACK
y
•We recommend using AUTO in most cases.
•You can designate the default input mode to be selected when the power of this unit is turned on (see page 84).
Notes
•If the digital output data of the player has been processed in any way, you may not be able to perform DTS decoding even if you make a digital connection between this unit and the player.
•If this unit detects a Dolby Digital or DTS signal, the decoder automatically switches to the appropriate sound field program.
•The input jacks not assigned are not available as input modes.
■Displaying information about the input
source
You can display the type, format and sampling frequency of the current input signal.
1Set AMP/SOURCE/TV to AMP and then press SET MENU on the remote control.
The top SET MENU screen appears in the OSD.
AMP
| SET MENU |
SOURCE | MENU |
| |
| SRCH MODE |
TV
SET MENU
. ;AUTO SETUP ;MANUAL SETUP
. ;INFORMATION
p | p |
2Press n repeatedly and then press ENTER to select INFORMATION.
PRESET/CH | PRESET/CH |
ENTER | ENTER |
The following information appears in the OSD.
Note
Press l / h to toggle between the audio and video information displays.
Audio information
FORMAT
Signal format display. When the unit cannot detect a digital signal, it automatically switches to analog input.
SAMPLING
Sampling frequency. When the unit is unable to detect the sampling frequency “?” appears.
CHANNEL
Number of source channels in the input signal. For example, a
BITRATE
Bit rate. When the unit is unable to detect the bit rate “– –
DIALOGUE
Dialogue normalization information for Dolby Digital and DTS signals.
FLAG
Flag data encoded in Dolby Digital, DTS and PCM signals that cue this unit to automatically switch decoders.
Video information
HDMI Signal Type
Type of the HDMI signals input or output at the HDMI IN/OUT jacks of this unit.
HDMI Resolution
Resolution of the HDMI signals input or output at the HDMI IN/OUT jacks of this unit.
Analog Resolution
Resolution of the analog signals input or output at the video component jacks of this unit.
3Press SET MENU on the remote control again to exit.
SET MENU
MENU
SRCH MODE
42
