Yamaha HTR-5990 Standby, Power, Audio SEL, Sleep, Multi CH, Volume +, Amp/Source/Tv, Mute, Night

CONTROLS AND FUNCTIONS

ASTANDBY

Sets this unit, Zone 2 and Zone 3 to the standby mode (see page 28).

Note

This button is operational only when MASTER ON/OFF on the front panel is pressed inward to the ON position.

BPOWER

Turns on this unit, Zone 2 and Zone 3 (see page 28).

Note

This button is operational only when MASTER ON/OFF on the front panel is pressed inward to the ON position.

CAUDIO SEL

Toggles the priority for the type of audio input jack between AUTO, HDMI, COAX/OPT and ANALOG when one component is connected to two or more input jacks on the rear panel (see page 41).

DSLEEP

Sets the sleep timer.

EMULTI CH IN

Selects MULTI CH INPUT when using an external decoder, etc.

FSELECT k / n

Selects another input source that you can control independently of the input source selected with the input selector buttons.

GVOLUME +/–

Increases or decreases the volume level.

HAMP/SOURCE/TV

Selects the component you want to control with the remote control.

AMP

Set to this position to operate this unit.

SOURCE

Set to this position to operate the component selected with an input selector button.

TV

Set to this position to operate the television assigned to either DTV or PHONO.

Note

If televisions are assigned to both DTV and PHONO, the one assigned to DTV takes priority and gets operated when AMP/ SOURCE/TV is set to TV.

y

To set the remote control codes for other components, see page 92.

IMUTE

Mutes the sound. Press again to restore the audio output to the previous volume level.

JPURE DIRECT

Turns on or off the PURE DIRECT mode (see page 39).

KSET MENU

Enters or exits the SET MENU mode.

LNIGHT

Turns on or off the night listening modes (see page 39).

MON SCREEN

Selects the display mode of the on-screen display (OSD) that appears on your monitor (see page 87).

NSTRAIGHT (EFFECT)

Switches the sound field programs off or on. When STRAIGHT is selected, 2-channel or multi-channel input signals are output directly from their respective speakers without effect processing.

OSPEAKERS A/B

Turns on or off the set of front speakers connected to the SPEAKERS A and/or B terminals on the rear panel each time the corresponding button is pressed.

PRE-NAME

Changes the name of the input source in the display window (see page 96).

QCLEAR

Clears remote control codes or functions acquired from the learn, macro and rename features (see page 99).

RLEARN

Programs remote control codes or functions from other remote controls (see page 94).

8