
FM/AM TUNING
3Press and hold MEMORY (MAN’L/AUTO FM) on the front panel for more than 3 seconds.
The preset group and number as well as the MEMORY and AUTO indicators flash. After approximately 5 seconds, automatic presetting starts from the currently selected frequency and proceeds toward the higher frequencies.
MEMORY
MAN'L/AUTO
| CD PHONO | TUNER XM | |
| C8:FM 87.5 MHz | VOLUME | AUTO MEMORY |
|
|
| dB |
SP | Straight |
|
|
A | L | R |
When automatic preset tuning is completed, the front panel display shows the frequency of the last preset station.
Notes
•Any station data stored under a preset station number is cleared when you store a new station under the same preset station number.
•If the preset number of the received stations does not reach 40 (E8), automatic preset tuning automatically stops after programming all available stations.
•Only FM stations with sufficient signal strength are stored automatically by automatic preset tuning. If the station you want to store is weak in signal strength, tune into it manually and store it by following the procedure in “Manual preset tuning”.
■Customized automatic preset tuning
You can specify a preset station group and a preset station number from which this unit stores the FM stations received by automatic preset tuning.
1Repeat steps 1 and 2 in “Automatic tuning”.
2Press A/B/C/D/E and then PRESET/TUNING/ CH l / h on the front panel to select the preset station group and the preset station number where the first received station will be stored.
For example, if you select C5, the first received station is automatically programmed to C5 and the next received stations are sequentially programmed to C6, C7, etc.
A/B/C/D/E | l PRESET/TUNING/CH h |
CATEGORY
Note
Automatic preset tuning stops when the received stations have all been stored up to E8.
Memory back-up
The memory
46