Yamaha HTR-5990 owner manual Controlling Zone 2 and Zone, Remote control operations, Notes

ZONE 2/ZONE 3

y

•You must complete this step within 5 seconds while the selected zone flashes in the front panel display. Otherwise, the currently selected zone mode is automatically canceled. In this case, press ZONE CONTROL again.

•The initial setting is ZONE2 when both Zone 2 and Zone 3 are turned on.

3Proceed to “Controlling Zone 2 and Zone 3” on page 104 for detailed information on the Zone 2 and Zone 3 control functions.

■Remote control operations

1Set AMP/SOURCE/TV on the remote control to AMP.

AMP

SOURCE

TV

2Press SELECT k repeatedly to select the zone you want to control.

ZONE 2 or ZONE 3 is displayed in the display window.

SELECT

or

3Proceed to “Controlling Zone 2 and Zone 3” for detailed information on the Zone 2 and Zone 3 control functions.

4Press SELECT k / n to exit from the

Zone 2/Zone 3 mode.

Notes

•The input source of Zone 2 and the source available for recording are always the same.

•ZONE 2 or ZONE 3 appears in the display window only when k is pressed, and ALL appears only when n is pressed.

Controlling Zone 2 and Zone 3

Once the zone you want to control is selected as described in “Selecting Zone 2 or Zone 3” on page 103, you can control Zone 2 and Zone 3 by using the control buttons on the front panel or on the remote control. The available operations are listed as follows:

•Selecting the input source of Zone 2 or Zone 3

•Adjusting the volume level of Zone 2 or Zone 3

•Adjusting the tonal quality of Zone 2 or Zone 3

•Tuning into FM or AM when TUNER is selected as the input source of Zone 2 or Zone 3

•Tuning into the XM Satellite Radio when XM is selected as the input source of Zone 2 or Zone 3

■Selecting the input source of Zone 2 or Zone 3

Use the INPUT selector on the front panel (or press one of the input selector buttons on the remote control) to select the input source of the selected zone.

If the remote control is used to select the input source, “2: name of the selected input source” or “3: name of the selected input source” is displayed in the display window when Zone 2 or Zone 3 is selected respectively.

(U.S.A. model)

A	XM	AUDIO SEL	SLEEP
INPUT
PHONO	TUNER	CD	MULTI CH IN
or
V-AUX	CBL/SAT	MD/TAPE	CD-R
DTV	VCR 1	DVR/VCR2	DVD

•Select TUNER as the input source to use the TUNER features in the selected zone. For details about the TUNER operations, see “FM/AM TUNING” on page 44.

•Select XM as the input source to use the XM Satellite Radio features in the selected zone. For details about the XM Satellite Radio operations, see “XM SATELLITE RADIO TUNING” on page 50.

Note

The selected input source is shared across all zones.

y

You must complete this step within 5 seconds while the selected zone flashes in the front panel display. Otherwise, the currently selected zone mode is automatically canceled. In this case, press ZONE CONTROL on the front panel again.

104