Accessories
Accessories Supplied
Check that you have the Accessories and items shown
Operating Instruction book
HDMI cable
(for
Remote Control Transmitter TNQ4CM051
POWER INPUT
MENUMUTE
RETURN
RECALL ASPECT OFF TIMER
TNQ4CM051 CH VOL
DISPLAY
Batteries for the Remote Control Transmitter (AA Size × 2)
Remote Control Batteries
Requires two AA batteries.
1. Push the hook to release, then open the battery cover. 2. Insert batteries - note the correct polarity ( + and
Open
Close
Hook
Helpful Hint:
For frequent remote control users, replace old batteries with Alkaline batteries for longer life.
Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter. Disposal of batteries should be in an
Observe the following precautions:
1.Batteries should always be replaced as a pair. Always use new batteries when replacing the old set.
2.Do not combine a used battery with a new one.
3.Do not mix battery types (example: “Zinc Carbon” with “Alkaline”).
4.Do not attempt to charge,
5.Battery replacement is necessary when the remote control acts sporadically or stops operating the Plasma Display.
6.Do not burn or breakup batteries.
Batteries must not be exposed to excessive heat such as sunshine, fire or the like.
